A stability-indicating high performance liquid chromatographic assay for the determination of orlistat in capsules
- Mohammadi, Ali, Haririan, I, Rezanour, I, Ghiasi, L, Walker, Roderick B
- Authors: Mohammadi, Ali , Haririan, I , Rezanour, I , Ghiasi, L , Walker, Roderick B
- Date: 2006
- Language: English
- Type: Article , text
- Identifier: vital:6407 , http://hdl.handle.net/10962/d1006480
- Description: A stability-indicating HPLC method was developed and validated for the quantitative determination of orlistat in capsule dosage forms. An isocratic separation was achieved using a Perfectsil® target ODS-3, 250 mm × 4.6 mm i.d., 5 µm particle size column with a flow rate of 0.7 ml/min and using a UV detector to monitor the eluate at 210 nm. The mobile phase consisted of methanol:acetonitrile:trifluoroacetic acid (82.5:17.5:0.01, v/v/v). The drug was subjected oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compound and all degradation products in an overall analytical run time of approximately 15 min with the parent compound orlistat eluting at approximately 9 min. The method was linear over the concentration range of 0.02–0.75 mg/ml (r = 0.9998) with a limit of detection and quantitation 0.006 and 0.02 mg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay orlistat in capsules. Degradation products resulting from the stress studies did not interfere with the detection of orlistat and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2006
- Authors: Mohammadi, Ali , Haririan, I , Rezanour, I , Ghiasi, L , Walker, Roderick B
- Date: 2006
- Language: English
- Type: Article , text
- Identifier: vital:6407 , http://hdl.handle.net/10962/d1006480
- Description: A stability-indicating HPLC method was developed and validated for the quantitative determination of orlistat in capsule dosage forms. An isocratic separation was achieved using a Perfectsil® target ODS-3, 250 mm × 4.6 mm i.d., 5 µm particle size column with a flow rate of 0.7 ml/min and using a UV detector to monitor the eluate at 210 nm. The mobile phase consisted of methanol:acetonitrile:trifluoroacetic acid (82.5:17.5:0.01, v/v/v). The drug was subjected oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compound and all degradation products in an overall analytical run time of approximately 15 min with the parent compound orlistat eluting at approximately 9 min. The method was linear over the concentration range of 0.02–0.75 mg/ml (r = 0.9998) with a limit of detection and quantitation 0.006 and 0.02 mg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay orlistat in capsules. Degradation products resulting from the stress studies did not interfere with the detection of orlistat and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2006
Development and validation of a stability-indicating analytical method for the quantitation of oxytocin in pharmaceutical dosage forms
- Chaibva, Faith A, Walker, Roderick B
- Authors: Chaibva, Faith A , Walker, Roderick B
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6349 , http://hdl.handle.net/10962/d1006030
- Description: A single stability-indicating assay for oxytocin (OT) in pharmaceutical dosage forms using gradient elution over 21 min has been reported in the literature. Furthermore, published and compendial methods for the analysis of OT containing dosage forms also involve using HPLC with gradient elution and complicated mobile phases that include hydrophobic ion pairing agents. A simple isocratic and stability-indicating assay was developed and validated. The conditions are as follows, column: Phenomenex® C18 Hypersil, 5 μm packing, 4.6 mm × 150 mm with acetonitrile–phosphate buffer (pH 5; 0.08 M) (20:80) as the mobile phase with UV detection at 220 nm The method was found to be specific for OT in the presence of degradation products and chlorbutol (preservative) with an overall analytical run time of 16 min. Accuracy was determined to be 0.77–1.18% bias for all samples tested. Intra-assay precision (repeatability) was found to be 0.22–1.04%R.S.D. while the inter-day precision (intermediate precision) was found to be 1.27–1.68%R.S.D. for the samples studied. The calibration curve was found to be linear with the equation y = 1.81x + 0.02 and a linear regression coefficient of 0.9991 over the range 0.4–12.0 IU/ml. The LOD and the LOQ were determined to be 0.1 and 0.4 IU/ml, respectively. Syntocinon®, a commercially available dosage form of OT was assayed resulting in 100.5–106.6% recovery of the label claim and an average of 10.04 IU/ml.
- Full Text:
- Date Issued: 2006
- Authors: Chaibva, Faith A , Walker, Roderick B
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6349 , http://hdl.handle.net/10962/d1006030
- Description: A single stability-indicating assay for oxytocin (OT) in pharmaceutical dosage forms using gradient elution over 21 min has been reported in the literature. Furthermore, published and compendial methods for the analysis of OT containing dosage forms also involve using HPLC with gradient elution and complicated mobile phases that include hydrophobic ion pairing agents. A simple isocratic and stability-indicating assay was developed and validated. The conditions are as follows, column: Phenomenex® C18 Hypersil, 5 μm packing, 4.6 mm × 150 mm with acetonitrile–phosphate buffer (pH 5; 0.08 M) (20:80) as the mobile phase with UV detection at 220 nm The method was found to be specific for OT in the presence of degradation products and chlorbutol (preservative) with an overall analytical run time of 16 min. Accuracy was determined to be 0.77–1.18% bias for all samples tested. Intra-assay precision (repeatability) was found to be 0.22–1.04%R.S.D. while the inter-day precision (intermediate precision) was found to be 1.27–1.68%R.S.D. for the samples studied. The calibration curve was found to be linear with the equation y = 1.81x + 0.02 and a linear regression coefficient of 0.9991 over the range 0.4–12.0 IU/ml. The LOD and the LOQ were determined to be 0.1 and 0.4 IU/ml, respectively. Syntocinon®, a commercially available dosage form of OT was assayed resulting in 100.5–106.6% recovery of the label claim and an average of 10.04 IU/ml.
- Full Text:
- Date Issued: 2006
Generic substitution: the use of medicinal products containing different salts and implications for safety and efficacy
- Verbeeck, R K, Kanfer, Isadore, Walker, Roderick B
- Authors: Verbeeck, R K , Kanfer, Isadore , Walker, Roderick B
- Date: 2006
- Language: English
- Type: text , Article
- Identifier: vital:6445 , http://hdl.handle.net/10962/d1006632
- Description: In their quest to gain early entry of new generic products into the market prior to patent expiration, one of the strategies pursued by generic drug product manufacturers is to incorporate different salts of an approved active pharmaceutical ingredient (API) in a brand company's marketed dosage form and subject such dosage forms to bioequivalence assessment. These initiatives present challenges to regulatory authorities where the decision to approve bioequivalent products containing such pharmaceutical alternatives must be considered in the light of safety and efficacy, and more particularly, with respect to their substitutability. This article describes the various issues and contentions associated with the concept of pharmaceutical alternatives, specifically with respect to the uses of different salts and the implications for safety, efficacy and generic substitution.
- Full Text:
- Date Issued: 2006
- Authors: Verbeeck, R K , Kanfer, Isadore , Walker, Roderick B
- Date: 2006
- Language: English
- Type: text , Article
- Identifier: vital:6445 , http://hdl.handle.net/10962/d1006632
- Description: In their quest to gain early entry of new generic products into the market prior to patent expiration, one of the strategies pursued by generic drug product manufacturers is to incorporate different salts of an approved active pharmaceutical ingredient (API) in a brand company's marketed dosage form and subject such dosage forms to bioequivalence assessment. These initiatives present challenges to regulatory authorities where the decision to approve bioequivalent products containing such pharmaceutical alternatives must be considered in the light of safety and efficacy, and more particularly, with respect to their substitutability. This article describes the various issues and contentions associated with the concept of pharmaceutical alternatives, specifically with respect to the uses of different salts and the implications for safety, efficacy and generic substitution.
- Full Text:
- Date Issued: 2006
- «
- ‹
- 1
- ›
- »