A Combined Experimental and Computational Study of Hydridospirophosphorane Ligand Systems Featuring Halogenated Mandelic Acids
- Authors: Maritz, Marius Johann
- Date: 2023-12
- Subjects: Organic compounds -- Synthesis , Heterocyclic compounds , catalysis -- South Africa
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/62096 , vital:71911
- Description: The search for new stereoselective catalysts remains important for the isolation of enantiomeric products from racemic mixtures. The need exists for these catalysts to be more efficient, to be more cost effective as well as be stable over time without undergoing changes in molecular structure and selectivity. The purpose of this research project was to experimentally synthesise and characterise asymmetric catalysts for the use in enantioselective synthesis. The catalysts consisted of the main group element phosphorous as central atom, with the phenyl rings of mandelic acid ligands monosubstituted with halogen atoms fluorine, chlorine and bromine in different configurations. Ligand binding resulted in the formation of hydridospirophosphorane structures, from which the molecular properties and binding geometry of these molecules could be explained by the theory of apicophilicity. Characterization was performed by NMR and IR spectroscopy as well as diffraction studies that provided the experimental crystal structures. The structural, energetic and spectroscopy results were compared to the theoretically obtained molecular properties using DFT analysis. Various interand intramolecular interactions that existed between molecules found in crystal packing environments were discussed. Additional properties that were investigated included modelling solvation effects, molecular orbital analysis, Hirshfeld surfaces, orbital and atomic energy and population analysis as well as ESP energy calculations with the optimized crystal structures as input. Molecular overlay comparisons were also performed between the experimental and optimized structures where the effectiveness of various DFT functionals and basis sets could be determined. The method with the best overall cost-to-accuracy ratio was found to be the triple-zeta def2-tzvp basis set with B3LYP functional theory and the addition of Grimme’s dispersion correction. Results indicated differences in crystal packing depending largely on the given halogen atoms present in the substituted phenyl rings, with differences observed in electronegativity and steric effects. One of the crystal systems showed additional interactions with solvent molecules, giving the impression that obtaining crystal void formation was possible. Alterations in the transition state activation energies between the isomers of each molecule were found to be present and supported the theory behind the mechanism of stereochemical induction. The studied compounds were therefore effective in isolating different enantiomeric ligands by means of energy differences between conformers and displayed unique catalytic properties resulting from the phosphorous main group element. The hydridospirophosphoranes conformers responsible for the lowest theoretically calculated activation energy induced crystallization as was seen by diffraction results for all compounds. Even as an intriguing observation, crystallization will largely depend on solubility rather than a specific conformer’s amount in solution. , Thesis (MSc) -- Faculty of Science, School of Biomolecular and Chemical Sciences, 2023
- Full Text:
- Date Issued: 2023-12
- Authors: Maritz, Marius Johann
- Date: 2023-12
- Subjects: Organic compounds -- Synthesis , Heterocyclic compounds , catalysis -- South Africa
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/62096 , vital:71911
- Description: The search for new stereoselective catalysts remains important for the isolation of enantiomeric products from racemic mixtures. The need exists for these catalysts to be more efficient, to be more cost effective as well as be stable over time without undergoing changes in molecular structure and selectivity. The purpose of this research project was to experimentally synthesise and characterise asymmetric catalysts for the use in enantioselective synthesis. The catalysts consisted of the main group element phosphorous as central atom, with the phenyl rings of mandelic acid ligands monosubstituted with halogen atoms fluorine, chlorine and bromine in different configurations. Ligand binding resulted in the formation of hydridospirophosphorane structures, from which the molecular properties and binding geometry of these molecules could be explained by the theory of apicophilicity. Characterization was performed by NMR and IR spectroscopy as well as diffraction studies that provided the experimental crystal structures. The structural, energetic and spectroscopy results were compared to the theoretically obtained molecular properties using DFT analysis. Various interand intramolecular interactions that existed between molecules found in crystal packing environments were discussed. Additional properties that were investigated included modelling solvation effects, molecular orbital analysis, Hirshfeld surfaces, orbital and atomic energy and population analysis as well as ESP energy calculations with the optimized crystal structures as input. Molecular overlay comparisons were also performed between the experimental and optimized structures where the effectiveness of various DFT functionals and basis sets could be determined. The method with the best overall cost-to-accuracy ratio was found to be the triple-zeta def2-tzvp basis set with B3LYP functional theory and the addition of Grimme’s dispersion correction. Results indicated differences in crystal packing depending largely on the given halogen atoms present in the substituted phenyl rings, with differences observed in electronegativity and steric effects. One of the crystal systems showed additional interactions with solvent molecules, giving the impression that obtaining crystal void formation was possible. Alterations in the transition state activation energies between the isomers of each molecule were found to be present and supported the theory behind the mechanism of stereochemical induction. The studied compounds were therefore effective in isolating different enantiomeric ligands by means of energy differences between conformers and displayed unique catalytic properties resulting from the phosphorous main group element. The hydridospirophosphoranes conformers responsible for the lowest theoretically calculated activation energy induced crystallization as was seen by diffraction results for all compounds. Even as an intriguing observation, crystallization will largely depend on solubility rather than a specific conformer’s amount in solution. , Thesis (MSc) -- Faculty of Science, School of Biomolecular and Chemical Sciences, 2023
- Full Text:
- Date Issued: 2023-12
Generation of a virtual library of terpenes using graph theory, and its application in exploration of the mechanisms of terpene biosynthesis
- Authors: Dendera, Washington
- Date: 2020
- Subjects: Terpenes , Plants -- Metabolism , Computational biology , Bioinformatics , Organic compounds -- Synthesis , Monoterpenes , Molecular biology -- Computer simulation
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/123453 , vital:35439
- Description: Terpenes form a large group of organic compounds which have proven to be of use to many living organisms being used by plants for metabolism (Pichersky and Gershenzon, 1934; McGarvey and Croteau, 1995; Gershenzon and Dudareva, 2007), defence or as a means to attract pollinators and also used by humans in medical, pharmaceutical and food industry (Bicas, Dionísio and Pastore, 2009; Marmulla and Harder, 2014; Kandi et al., 2015). Following on literature methods to generate chemical libraries using graph theoretic techniques, complete libraries of all possible terpene isomers have been constructed with the goal of construction of derivative libraries of possible carbocation intermediates which are important in the elucidation of mechanisms in the biosynthesis of terpenes. Virtual library generation of monoterpenes was first achieved by generating graphs of order 7, 8, 9 and 10 using the Nauty and Traces suite. These were screened and processed with a set of collated Python scripts written to recognize the graphs in text format and translate them to molecules, minimizing through Tinker whilst discarding graphs that violate chemistry laws. As a result of the computational time required only order 7 and order 10 graphs were processed. Out of the 873 graphs generated from order seven, 353 were converted to molecules and from the 11,7 million produced from order 10 half were processed resulting in the production of 442928 compounds (repeats included). For screening, 55 366 compounds were docked in the active site of limonene synthase; of these 2355 ligands had a good Vina docking score with a binding energy of between -7.0 and -7.4 kcal.mol-1. When these best docked molecules were overlaid in the active site a map of possible ligand positions within the active site of limonene synthase was traced out.
- Full Text:
- Date Issued: 2020
- Authors: Dendera, Washington
- Date: 2020
- Subjects: Terpenes , Plants -- Metabolism , Computational biology , Bioinformatics , Organic compounds -- Synthesis , Monoterpenes , Molecular biology -- Computer simulation
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/123453 , vital:35439
- Description: Terpenes form a large group of organic compounds which have proven to be of use to many living organisms being used by plants for metabolism (Pichersky and Gershenzon, 1934; McGarvey and Croteau, 1995; Gershenzon and Dudareva, 2007), defence or as a means to attract pollinators and also used by humans in medical, pharmaceutical and food industry (Bicas, Dionísio and Pastore, 2009; Marmulla and Harder, 2014; Kandi et al., 2015). Following on literature methods to generate chemical libraries using graph theoretic techniques, complete libraries of all possible terpene isomers have been constructed with the goal of construction of derivative libraries of possible carbocation intermediates which are important in the elucidation of mechanisms in the biosynthesis of terpenes. Virtual library generation of monoterpenes was first achieved by generating graphs of order 7, 8, 9 and 10 using the Nauty and Traces suite. These were screened and processed with a set of collated Python scripts written to recognize the graphs in text format and translate them to molecules, minimizing through Tinker whilst discarding graphs that violate chemistry laws. As a result of the computational time required only order 7 and order 10 graphs were processed. Out of the 873 graphs generated from order seven, 353 were converted to molecules and from the 11,7 million produced from order 10 half were processed resulting in the production of 442928 compounds (repeats included). For screening, 55 366 compounds were docked in the active site of limonene synthase; of these 2355 ligands had a good Vina docking score with a binding energy of between -7.0 and -7.4 kcal.mol-1. When these best docked molecules were overlaid in the active site a map of possible ligand positions within the active site of limonene synthase was traced out.
- Full Text:
- Date Issued: 2020
The characterization and application of novel xanthenyland thioxanthenyl-derived compounds as hosts in the presence of various applicable guest mixtures
- Authors: Jooste, Daniel Victor
- Date: 2020
- Subjects: Organic compounds -- Synthesis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/49104 , vital:41601
- Description: In this work, the host potential of four novel, structurally-related compounds, trans- N,N’-bis(9-phenyl-9-xanthenyl)cyclohexane-1,2-diamine (1,2-DAX), trans-N,N’-bis(9- phenyl-9-thioxanthenyl)cyclohexane-1,2-diamine (1,2-DAT), trans-N,N’-bis(9-phenyl- 9-xanthenyl)cyclohexane-1,4-diamine (1,4-DAX), and trans-N,N’-bis(9-phenyl-9- thioxanthenyl)cyclohexane-1,4-diamine (1,4-DAT), were investigated for their possible employment in the separation of isomers and other related compounds using host– guest chemistry. These hosts were synthesized following a Grignard reaction with phenylmagnesium bromide on either xanthone or thioxanthone. The resultant alcohol was treated with perchloric acid, before finally being linked with either trans-1,2- or trans-1,4-diaminocyclohexane to afford the four title host compounds. Initially, the feasibility of these hosts for separating isomers and related compounds was investigated by recrystallizing each one independently from various guest compounds including the methylpyridines and pyridine, xylenes and ethylbenzene, heterocyclic six-membered ring compounds, aniline, N-methylaniline and N,Ndimethylaniline, and also the alkylbenzenes toluene, cumene and ethylbenzene. 1HNMR spectroscopy was used to ascertain if inclusion of the guest species had occurred in this manner and, if so, the host:guest ratio of the complex. Guest–guest competitions were subsequently conducted in order to establish the selectivity of the hosts when presented with a mixture of guests, and if the host would be able to discriminate between them. Gas chromatography-mass spectrometry (GC-MS) was the analytical method of choice here if 1H-NMR spectroscopy was not suitable owing to guest–guest signal overlap. Here, the host was recrystallized from binary, ternary and quaternary mixed guests, where each was present in equimolar amounts. Additionally, binary competition experiments were conducted in mixed guest solvents where the molar ratios of the guests were varied, and host selectivity for these guests evaluated visually by means of selectivity profiles. Single crystal X-ray diffraction (SC-XRD) and thermal analysis were performed on any complexes that afforded crystals of suitable quality in order to relate inherent host–guest interactions and thermal stability to the observed host selectivity from the competition experiments. The more prevalent interactions that were evident in these inclusion complexes between host and guest species were, more usually, and interactions, as well as other short contacts. Hydrogen bonding interactions were observed in only a few of the complexes. Guest accommodation type was also investigated, and these species resided in either discrete cavities or channels within the host crystal, depending on the guest. For the most part, traces obtained from thermal analyses were highly convoluted and difficult to interpret. As a result, guest release onset temperatures could not be determined for all of the inclusion complexes. In some cases, however, this temperature was successfully measured and correlated directly with the observed selectivity order of the host suggested by the competition experiments. Both enhanced and contrasting results were obtained for the four host compounds. In all cases, 1,2-DAX and 1,2-DAT successfully formed complexes with each of the guest species from each series. Interestingly, the 1,4-derived hosts, however, were more selective in that 1,4-DAX did not complex with only one of the guest solvents, while 1,4-DAT did not enclathrate as many as ten of these solvents. The competition investigations showed that, in most of these experiments, the host compounds displayed selectivity for one of the guests present in the mixture, and in some cases, this selectivity was pronounced, alluding to the feasibility of separating related guests from one another through host–guest chemistry principles. Computational calculations were, additionally, conducted on each of the host molecules in order to gain a better understanding of their geometries, and to compare these with the apohost crystal structures. Significant geometry differences were noted between the calculated and crystal structures.
- Full Text:
- Date Issued: 2020
- Authors: Jooste, Daniel Victor
- Date: 2020
- Subjects: Organic compounds -- Synthesis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/49104 , vital:41601
- Description: In this work, the host potential of four novel, structurally-related compounds, trans- N,N’-bis(9-phenyl-9-xanthenyl)cyclohexane-1,2-diamine (1,2-DAX), trans-N,N’-bis(9- phenyl-9-thioxanthenyl)cyclohexane-1,2-diamine (1,2-DAT), trans-N,N’-bis(9-phenyl- 9-xanthenyl)cyclohexane-1,4-diamine (1,4-DAX), and trans-N,N’-bis(9-phenyl-9- thioxanthenyl)cyclohexane-1,4-diamine (1,4-DAT), were investigated for their possible employment in the separation of isomers and other related compounds using host– guest chemistry. These hosts were synthesized following a Grignard reaction with phenylmagnesium bromide on either xanthone or thioxanthone. The resultant alcohol was treated with perchloric acid, before finally being linked with either trans-1,2- or trans-1,4-diaminocyclohexane to afford the four title host compounds. Initially, the feasibility of these hosts for separating isomers and related compounds was investigated by recrystallizing each one independently from various guest compounds including the methylpyridines and pyridine, xylenes and ethylbenzene, heterocyclic six-membered ring compounds, aniline, N-methylaniline and N,Ndimethylaniline, and also the alkylbenzenes toluene, cumene and ethylbenzene. 1HNMR spectroscopy was used to ascertain if inclusion of the guest species had occurred in this manner and, if so, the host:guest ratio of the complex. Guest–guest competitions were subsequently conducted in order to establish the selectivity of the hosts when presented with a mixture of guests, and if the host would be able to discriminate between them. Gas chromatography-mass spectrometry (GC-MS) was the analytical method of choice here if 1H-NMR spectroscopy was not suitable owing to guest–guest signal overlap. Here, the host was recrystallized from binary, ternary and quaternary mixed guests, where each was present in equimolar amounts. Additionally, binary competition experiments were conducted in mixed guest solvents where the molar ratios of the guests were varied, and host selectivity for these guests evaluated visually by means of selectivity profiles. Single crystal X-ray diffraction (SC-XRD) and thermal analysis were performed on any complexes that afforded crystals of suitable quality in order to relate inherent host–guest interactions and thermal stability to the observed host selectivity from the competition experiments. The more prevalent interactions that were evident in these inclusion complexes between host and guest species were, more usually, and interactions, as well as other short contacts. Hydrogen bonding interactions were observed in only a few of the complexes. Guest accommodation type was also investigated, and these species resided in either discrete cavities or channels within the host crystal, depending on the guest. For the most part, traces obtained from thermal analyses were highly convoluted and difficult to interpret. As a result, guest release onset temperatures could not be determined for all of the inclusion complexes. In some cases, however, this temperature was successfully measured and correlated directly with the observed selectivity order of the host suggested by the competition experiments. Both enhanced and contrasting results were obtained for the four host compounds. In all cases, 1,2-DAX and 1,2-DAT successfully formed complexes with each of the guest species from each series. Interestingly, the 1,4-derived hosts, however, were more selective in that 1,4-DAX did not complex with only one of the guest solvents, while 1,4-DAT did not enclathrate as many as ten of these solvents. The competition investigations showed that, in most of these experiments, the host compounds displayed selectivity for one of the guests present in the mixture, and in some cases, this selectivity was pronounced, alluding to the feasibility of separating related guests from one another through host–guest chemistry principles. Computational calculations were, additionally, conducted on each of the host molecules in order to gain a better understanding of their geometries, and to compare these with the apohost crystal structures. Significant geometry differences were noted between the calculated and crystal structures.
- Full Text:
- Date Issued: 2020
Application of computational methods in elucidating the isomerization step in the biosynthesis of coumarins
- Authors: Tshiwawa, Tendamudzimu
- Date: 2019
- Subjects: Coumarins , Isomerization , Biosynthesis , Organic compounds -- Synthesis , Cinnamic acid
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/67646 , vital:29124
- Description: The identity of the enzyme(s) responsible for the biosynthetic transformation of cinnamic acid derivatives to important, naturally occurring coumarins has yet to be established. This study constitutes a high-level theoretical analysis of the possibility that a recently reported molecular mechanism of the synthesis of coumarins from Baylis-Hillman adducts, may provide a viable model for three critical phases in the biosynthetic pathway Particular attention has been given to the first of these phases: i) E→Z isomerisation of the cinnamic acid precursor; ii) Cyclisation (lactonisation) to the hemi-acetal intermediate; and ii) Dehydration to afford the coumarin derivative. In order to accomplish this analysis, an enzyme capable, theoretically, of effecting this E→Z isomerisation required identification, and its potential involvement in the transformation mechanism explored. Combined Molecular Mechanics and high-level Quantum Mechanical/DFT calculations were used to access complementary models of appropriate complexes and relevant processes within the enzyme active sites of a range of eleven Chalcone Isomerase (CHI) enzyme candidates, the structures of which were downloaded from the Protein Data Bank. Detailed B3LYP/6-31+G(d,p) calculations have provided pictures of the relative populations of conformations within the ensemble of conformations available at normal temperatures. Conformations of several protonation states of cinnamic acid derivatives have been studied in this way, and the results obtained showed that coupled protonation and deprotonation of (E)-o-coumaric acid provides a viable approach to achieve the E→Z isomerization. In silico docking of the B3LYP/6-31+G(d,p) optimized (E)-o-coumaric acid derivatives in the active sites of each of the candidate CHI enzymes (CHI) revealed that (E)-o-coumaric acid fits well within the active sites of Medicago Sativa CHI crystallographic structures with 1FM8 showing best potential for not only accommodating (E)-o-coumaric acid , but also providing appropriate protein active site residues to effect the simultaneous protonation and deprotonation of the substrate , two residues being optimally placed to facilitate these critical processes. Further exploration of the chemical properties and qualities of selected CHI enzymes, undertaken using High Throughput Virtual Screening (HTVS), confirmed 1FM8 as a viable choice for further studies of the enzyme-catalysed E→Z isomerization of (E)-o-coumaric acid. A molecular dynamics study, performed to further evaluate the evolution of (E)-o-coumaric acid in the CHI active site over time, showed that the ligand in the 1FM8 active site is not only stable, but also that the desired protein-ligand interactions persist throughout the simulation period to facilitate the E→Z isomerization. An integrated molecular orbital and molecular mechanics (ONIOM) study of the 1FM8-(E)-o-coumaric acid complex, involving the direct protonation and deprotonation of the ligand by protein residues; has provided a plausible mechanism for the E → Z isomerization of (E)-o-coumaric acid within the 1FM8 active site; a transition state complex (with an activation energy of ca. 50 kCal.mol-1) has been located and its connection with both the (E)- and (Z)-o-coumaric acid isomer has been confirmed by Intrinsic Reaction Coordinate (IRC) calculations. More realistic models of the 1FM8-(E)-o-coumaric acid complex, with the inclusion of water solvent molecules, have been obtained at both the QM/MM and adaptive QM/MM levels which simulate the dynamic active site at the QM level. The results indicate that the simultaneous protonation and deprotonation of (E)-o-coumaric acid within the CHI enzyme is a water-mediated process – a conclusion consistent with similar reported processes. Visual inspection of the 1FM8-(Z)-o-coumaric acid complex reveals both the necessary orientation of the phenolic and carboxylic acid moieties of the (Z)-o-coumaric acid and the presence of appropriate, proximal active site residues with the potential to permit catalysis of the subsequent lactonisation and dehydration steps required to generate coumarin.
- Full Text:
- Date Issued: 2019
- Authors: Tshiwawa, Tendamudzimu
- Date: 2019
- Subjects: Coumarins , Isomerization , Biosynthesis , Organic compounds -- Synthesis , Cinnamic acid
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/67646 , vital:29124
- Description: The identity of the enzyme(s) responsible for the biosynthetic transformation of cinnamic acid derivatives to important, naturally occurring coumarins has yet to be established. This study constitutes a high-level theoretical analysis of the possibility that a recently reported molecular mechanism of the synthesis of coumarins from Baylis-Hillman adducts, may provide a viable model for three critical phases in the biosynthetic pathway Particular attention has been given to the first of these phases: i) E→Z isomerisation of the cinnamic acid precursor; ii) Cyclisation (lactonisation) to the hemi-acetal intermediate; and ii) Dehydration to afford the coumarin derivative. In order to accomplish this analysis, an enzyme capable, theoretically, of effecting this E→Z isomerisation required identification, and its potential involvement in the transformation mechanism explored. Combined Molecular Mechanics and high-level Quantum Mechanical/DFT calculations were used to access complementary models of appropriate complexes and relevant processes within the enzyme active sites of a range of eleven Chalcone Isomerase (CHI) enzyme candidates, the structures of which were downloaded from the Protein Data Bank. Detailed B3LYP/6-31+G(d,p) calculations have provided pictures of the relative populations of conformations within the ensemble of conformations available at normal temperatures. Conformations of several protonation states of cinnamic acid derivatives have been studied in this way, and the results obtained showed that coupled protonation and deprotonation of (E)-o-coumaric acid provides a viable approach to achieve the E→Z isomerization. In silico docking of the B3LYP/6-31+G(d,p) optimized (E)-o-coumaric acid derivatives in the active sites of each of the candidate CHI enzymes (CHI) revealed that (E)-o-coumaric acid fits well within the active sites of Medicago Sativa CHI crystallographic structures with 1FM8 showing best potential for not only accommodating (E)-o-coumaric acid , but also providing appropriate protein active site residues to effect the simultaneous protonation and deprotonation of the substrate , two residues being optimally placed to facilitate these critical processes. Further exploration of the chemical properties and qualities of selected CHI enzymes, undertaken using High Throughput Virtual Screening (HTVS), confirmed 1FM8 as a viable choice for further studies of the enzyme-catalysed E→Z isomerization of (E)-o-coumaric acid. A molecular dynamics study, performed to further evaluate the evolution of (E)-o-coumaric acid in the CHI active site over time, showed that the ligand in the 1FM8 active site is not only stable, but also that the desired protein-ligand interactions persist throughout the simulation period to facilitate the E→Z isomerization. An integrated molecular orbital and molecular mechanics (ONIOM) study of the 1FM8-(E)-o-coumaric acid complex, involving the direct protonation and deprotonation of the ligand by protein residues; has provided a plausible mechanism for the E → Z isomerization of (E)-o-coumaric acid within the 1FM8 active site; a transition state complex (with an activation energy of ca. 50 kCal.mol-1) has been located and its connection with both the (E)- and (Z)-o-coumaric acid isomer has been confirmed by Intrinsic Reaction Coordinate (IRC) calculations. More realistic models of the 1FM8-(E)-o-coumaric acid complex, with the inclusion of water solvent molecules, have been obtained at both the QM/MM and adaptive QM/MM levels which simulate the dynamic active site at the QM level. The results indicate that the simultaneous protonation and deprotonation of (E)-o-coumaric acid within the CHI enzyme is a water-mediated process – a conclusion consistent with similar reported processes. Visual inspection of the 1FM8-(Z)-o-coumaric acid complex reveals both the necessary orientation of the phenolic and carboxylic acid moieties of the (Z)-o-coumaric acid and the presence of appropriate, proximal active site residues with the potential to permit catalysis of the subsequent lactonisation and dehydration steps required to generate coumarin.
- Full Text:
- Date Issued: 2019
Synthesis of L-menthyl glyoxylate, an important intermediate in the manufacture of ARVS, using flow chemistry technology
- Authors: Moyo, McQuillan
- Date: 2017
- Subjects: Chemistry , Pharmaceutical chemistry , Organic compounds -- Synthesis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/12019 , vital:27018
- Description: Herein an alternative approach to the conventional batch synthesis of L-menthyl glyoxylate hydrate (MGH), an important intermediate in the synthesis of drugs of importance is reported, through flow chemistry technology. MGH was initially synthesized in batch and various reaction parameters optimized. It was found to proceed to completion after 6 hours of esterifying glyoxylic acid with excess alcohol (L-menthol) in the presence of a catalyst, ideally amberlyst-15 (an ion exchange resin) at 105 °C giving a yield of 72 %. The batch reaction conditions were adopted in a continuous flow synthesis setup, using the Labtrix Start system, in which reaction conditions were optimized. The optimization of glyoxylic acid conversion (92 %) in the Labtrix Start system gave reaction conditions that resulted in low MGH selectivity (25 %) whereas the optimization for MGH selectivity (100 %) gave a conversion a poor glyoxylic acid conversion (15 %). The FlowSyn system fitted with a column reactor gave the best results, in which the optimum conditions were an excess of L-menthol (1.5 M, 6.0 equiv.), temperature (80 °C) and a residence time of 2.5 minutes with a high selectivity (77 %) and average conversion (50 %). The optimized reaction conditions for conversion and selectivity on the different flow systems did not vary significantly and similar trends were observed for the systems. It was shown that an increase in temperature, mole equivalents and residence time led to an increase in MGH conversion in all flow systems. The scale up of the esterification reaction from the Labtrix Start system (19 μL microreactor) to the FlowSyn system fitted with a 2 mL reactor chip, showed that the reaction proceeds with a slight drop in selectivity from 100 % to 92 % while conversion dropped from 15 to 12 %. On the contrary, a significant drop in conversion and selectivity were observed when the FlowSyn column reactor was up-scaled to the Elite-tubular furnace, owing to the poor mixing in the larger channel size reactor.
- Full Text:
- Date Issued: 2017
- Authors: Moyo, McQuillan
- Date: 2017
- Subjects: Chemistry , Pharmaceutical chemistry , Organic compounds -- Synthesis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/12019 , vital:27018
- Description: Herein an alternative approach to the conventional batch synthesis of L-menthyl glyoxylate hydrate (MGH), an important intermediate in the synthesis of drugs of importance is reported, through flow chemistry technology. MGH was initially synthesized in batch and various reaction parameters optimized. It was found to proceed to completion after 6 hours of esterifying glyoxylic acid with excess alcohol (L-menthol) in the presence of a catalyst, ideally amberlyst-15 (an ion exchange resin) at 105 °C giving a yield of 72 %. The batch reaction conditions were adopted in a continuous flow synthesis setup, using the Labtrix Start system, in which reaction conditions were optimized. The optimization of glyoxylic acid conversion (92 %) in the Labtrix Start system gave reaction conditions that resulted in low MGH selectivity (25 %) whereas the optimization for MGH selectivity (100 %) gave a conversion a poor glyoxylic acid conversion (15 %). The FlowSyn system fitted with a column reactor gave the best results, in which the optimum conditions were an excess of L-menthol (1.5 M, 6.0 equiv.), temperature (80 °C) and a residence time of 2.5 minutes with a high selectivity (77 %) and average conversion (50 %). The optimized reaction conditions for conversion and selectivity on the different flow systems did not vary significantly and similar trends were observed for the systems. It was shown that an increase in temperature, mole equivalents and residence time led to an increase in MGH conversion in all flow systems. The scale up of the esterification reaction from the Labtrix Start system (19 μL microreactor) to the FlowSyn system fitted with a 2 mL reactor chip, showed that the reaction proceeds with a slight drop in selectivity from 100 % to 92 % while conversion dropped from 15 to 12 %. On the contrary, a significant drop in conversion and selectivity were observed when the FlowSyn column reactor was up-scaled to the Elite-tubular furnace, owing to the poor mixing in the larger channel size reactor.
- Full Text:
- Date Issued: 2017
Development of a small production platform for citronellal processing
- Mafu, Lubabalo Rowan, Zeelie, Ben
- Authors: Mafu, Lubabalo Rowan , Zeelie, Ben
- Date: 2016
- Subjects: Organic compounds -- Synthesis , Plasticizers
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/8488 , vital:26370
- Description: The aim of the project was to develop a small production platform for citronellal processing. The objective of the study was to develop a single continuous flow reactor system for the synthesis of novel derivatives of citronellal and isopulegol. The first step was to develop a continuous flow reactor system for the isopulegol synthesis. The stainless steel tubular fixed-bed reactor equipped with a reaction column (I.D: 9.53 mm and length: 120 mm) was used for the study. The reactor column was packed with H-ZMS-5 zeolite extrusion catalyst. The solvent-free cyclisation reaction of citronellal was investigated and at optimum conditions, 100% of citronellal conversion and almost 100% selectivity towards isopulegol was achieved. A good catalytic performance was observed from the H-ZSM-5 catalyst and proved to be stable for a prolonged reaction time. The second reaction step was to develop a continuous flow reactor system for the synthesis of isopulegyl-ether derivatives. A UniQsis FlowSyn reactor system equipped with a stainless steel reactor column was used for the study. The reactor column was packed with amberlyst-15 dry catalyst. Wherein, n-propanol was employed as a model etherifying agent and as a reaction solvent. At optimum reaction condition, only 30% selectivity of isopulegyl propoxy-ether was achieved. The reaction was found to depend highly on temperature and residence time. The increase of these parameters was found to increase the side reactions and reduced the selectivity of the desired product. Other heterogeneous catalysts such as H-beta zeolite, aluminium pillared clay, Aluminium oxide and H-ZSM-5 were also evaluated in the reaction. Among these catalysts, a catalytic activity was observed with H-beta zeolite (19%) and aluminium pillared clay (5%). Based on these results, none of the evaluated catalysts provided the desired selectivity (greater than 70%) towards the isopulegyl propoxy-ether, therefore the process was not investigated further. In light of this, the isopulegol etherification synthetic route was terminated. Consequently, another analogue of citronellal was used as an alternative intermediate in place of isopulegol, namely para-menthane-3,8-diol (PMD). The initial studies for the synthesis of the novel PMD di-esters from isopulegol were performed in the batch-scale reactor. In a solvent-free reaction, acetic anhydride was initially used as a model acetylating agent. The reaction was performed using polymer-bound scandium triflate (PS-Sc(OTf)3) catalyst. The effect of reaction parameters such as temperature, molar ratio, and reaction time were studied towards the PMD conversion and di-esters selectivity. At optimum reaction conditions, PMD conversion of 70% and di-acetate selectivity of 67% were observed. The reaction was found to follow the zeroth-order kinetics with respect to PMD conversion and obeyed the Arrhenius equation. Other types of di-ester derivatives were synthesized from PMD by varying the carbon chain length of the acetylating agent. The prepared compounds were separated from the product mixtures by vacuum distillation, purified on a column chromatography and characterised by FT-IR, GC-MS, and 1H-NMR, 13C-NMR. The developed methodology was optimised in flow by using an ArrheniumOne microwave-assisted continuous-flow fixed-bed reactor system. A detailed experimental design was used to carry-out the reactions. The reaction parameters such as temperature and flow-rate were studied towards the PMD conversion and di-ester selectivity. From the experimental design analysis, the di-ester selectivity was found to depend highly on the residence time (flow-rate) and significantly on temperature. The PMD conversion and di-ester selectivity were found to increase with decrease in the flow-rate. The conversion and selectivity achieved in the continuous flow process were significantly higher than the achieved in the batch-scale process with respect to the residence time.
- Full Text:
- Date Issued: 2016
- Authors: Mafu, Lubabalo Rowan , Zeelie, Ben
- Date: 2016
- Subjects: Organic compounds -- Synthesis , Plasticizers
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/8488 , vital:26370
- Description: The aim of the project was to develop a small production platform for citronellal processing. The objective of the study was to develop a single continuous flow reactor system for the synthesis of novel derivatives of citronellal and isopulegol. The first step was to develop a continuous flow reactor system for the isopulegol synthesis. The stainless steel tubular fixed-bed reactor equipped with a reaction column (I.D: 9.53 mm and length: 120 mm) was used for the study. The reactor column was packed with H-ZMS-5 zeolite extrusion catalyst. The solvent-free cyclisation reaction of citronellal was investigated and at optimum conditions, 100% of citronellal conversion and almost 100% selectivity towards isopulegol was achieved. A good catalytic performance was observed from the H-ZSM-5 catalyst and proved to be stable for a prolonged reaction time. The second reaction step was to develop a continuous flow reactor system for the synthesis of isopulegyl-ether derivatives. A UniQsis FlowSyn reactor system equipped with a stainless steel reactor column was used for the study. The reactor column was packed with amberlyst-15 dry catalyst. Wherein, n-propanol was employed as a model etherifying agent and as a reaction solvent. At optimum reaction condition, only 30% selectivity of isopulegyl propoxy-ether was achieved. The reaction was found to depend highly on temperature and residence time. The increase of these parameters was found to increase the side reactions and reduced the selectivity of the desired product. Other heterogeneous catalysts such as H-beta zeolite, aluminium pillared clay, Aluminium oxide and H-ZSM-5 were also evaluated in the reaction. Among these catalysts, a catalytic activity was observed with H-beta zeolite (19%) and aluminium pillared clay (5%). Based on these results, none of the evaluated catalysts provided the desired selectivity (greater than 70%) towards the isopulegyl propoxy-ether, therefore the process was not investigated further. In light of this, the isopulegol etherification synthetic route was terminated. Consequently, another analogue of citronellal was used as an alternative intermediate in place of isopulegol, namely para-menthane-3,8-diol (PMD). The initial studies for the synthesis of the novel PMD di-esters from isopulegol were performed in the batch-scale reactor. In a solvent-free reaction, acetic anhydride was initially used as a model acetylating agent. The reaction was performed using polymer-bound scandium triflate (PS-Sc(OTf)3) catalyst. The effect of reaction parameters such as temperature, molar ratio, and reaction time were studied towards the PMD conversion and di-esters selectivity. At optimum reaction conditions, PMD conversion of 70% and di-acetate selectivity of 67% were observed. The reaction was found to follow the zeroth-order kinetics with respect to PMD conversion and obeyed the Arrhenius equation. Other types of di-ester derivatives were synthesized from PMD by varying the carbon chain length of the acetylating agent. The prepared compounds were separated from the product mixtures by vacuum distillation, purified on a column chromatography and characterised by FT-IR, GC-MS, and 1H-NMR, 13C-NMR. The developed methodology was optimised in flow by using an ArrheniumOne microwave-assisted continuous-flow fixed-bed reactor system. A detailed experimental design was used to carry-out the reactions. The reaction parameters such as temperature and flow-rate were studied towards the PMD conversion and di-ester selectivity. From the experimental design analysis, the di-ester selectivity was found to depend highly on the residence time (flow-rate) and significantly on temperature. The PMD conversion and di-ester selectivity were found to increase with decrease in the flow-rate. The conversion and selectivity achieved in the continuous flow process were significantly higher than the achieved in the batch-scale process with respect to the residence time.
- Full Text:
- Date Issued: 2016
Reactions towards the synthesis of the uncommon P57 cymarose moiety
- Authors: Mahanjana, Lungelwa
- Date: 2013
- Subjects: Chemistry, Organic , Organic compounds -- Synthesis
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/6711 , vital:21136
- Description: The work described in this study aims to investigate methods that will improve a lengthy synthetic pathway in the synthesis of the P57 cymarose moiety, and to examine the conformational structure of certain glycosides in order to shed light on the problematic stereochemical issues surrounding the formation of the cymarose glycosyl donor. The cymarose moiety forms part of the trisaccharide derivative present in P57, an appetite suppressant molecule. Modification of reaction steps in the conversion of the stereochemistry at C-3 of a previously reported synthesis of the P57 cymarose moiety was carried out. The first step was the selective oxidation of D-glucal using Pd/C in the presence of acetonitrile. These reaction conditions are more appropriate for the oxidation step to avoid decomposition of the formed molecules. Successive protection of the free OH groups was followed by NaBH4 reduction under stereo-controlled conditions, influenced by CeCl3•7H2O. However, the reduced product could not be isolated from the starting material and this led to ambiguous results when attempting to confirm whether the conversion of the stereochemistry at C-3 had occurred or not. The effect of reaction conditions, such as change in reaction temperature, during the preparation of the cymarose glycosyl donor was studied in order to find suitable reaction conditions to produce α,β-allo derivatives with high stereoselectivity. Compared to the reported synthetic method, this set-up gave improved yields with, unfortunately, similar or slightly lower selectivity to the formation of α-altro:α,β-allo derivative. Examination of the conformational structure of the allal derivative, in order to understand the mechanism at work during the placement of the directing group at C-2, was carried out using molecular modelling. The mechanistic implications of this very short study are discussed and it provides some insights into the likely pathway of the iodination reaction and its selectivity in particular, to the D-allose system.
- Full Text:
- Date Issued: 2013
- Authors: Mahanjana, Lungelwa
- Date: 2013
- Subjects: Chemistry, Organic , Organic compounds -- Synthesis
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/6711 , vital:21136
- Description: The work described in this study aims to investigate methods that will improve a lengthy synthetic pathway in the synthesis of the P57 cymarose moiety, and to examine the conformational structure of certain glycosides in order to shed light on the problematic stereochemical issues surrounding the formation of the cymarose glycosyl donor. The cymarose moiety forms part of the trisaccharide derivative present in P57, an appetite suppressant molecule. Modification of reaction steps in the conversion of the stereochemistry at C-3 of a previously reported synthesis of the P57 cymarose moiety was carried out. The first step was the selective oxidation of D-glucal using Pd/C in the presence of acetonitrile. These reaction conditions are more appropriate for the oxidation step to avoid decomposition of the formed molecules. Successive protection of the free OH groups was followed by NaBH4 reduction under stereo-controlled conditions, influenced by CeCl3•7H2O. However, the reduced product could not be isolated from the starting material and this led to ambiguous results when attempting to confirm whether the conversion of the stereochemistry at C-3 had occurred or not. The effect of reaction conditions, such as change in reaction temperature, during the preparation of the cymarose glycosyl donor was studied in order to find suitable reaction conditions to produce α,β-allo derivatives with high stereoselectivity. Compared to the reported synthetic method, this set-up gave improved yields with, unfortunately, similar or slightly lower selectivity to the formation of α-altro:α,β-allo derivative. Examination of the conformational structure of the allal derivative, in order to understand the mechanism at work during the placement of the directing group at C-2, was carried out using molecular modelling. The mechanistic implications of this very short study are discussed and it provides some insights into the likely pathway of the iodination reaction and its selectivity in particular, to the D-allose system.
- Full Text:
- Date Issued: 2013
Solvent-free synthesis of bisferrocenylimines and their coordination to rhodium (I)
- Authors: Kleyi, Phumelele Eldridge
- Date: 2009
- Subjects: Organic compounds -- Synthesis , Organic solvents , Solution (Chemistry) , Chemistry, Organic , Coordination compounds
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10393 , http://hdl.handle.net/10948/1053 , Organic compounds -- Synthesis , Organic solvents , Solution (Chemistry) , Chemistry, Organic , Coordination compounds
- Description: Solvent-free reactions possess advantages compared to the solvent route, such as shorter reaction times, less use of energy, better yields, etc. Herein, the synthesis and characterization of bisferrocenylimines and arylbisamines are described. Reduction of the above compounds with LAH resulted in the formation of bisferrocenylamines and arylbisamines, respectively. The coordination chemistry of all the above compounds to rhodium(I) is also discussed in the prepared complexes [Rh(COD)(NN)]ClO4, where NN = bisferrocenylimines, and [Rh(COD)(NN)]BF4, where NN = bisferrocenylamines and arylbisamines. X-ray crystal structures of the complexes [Rh(COD)(NN)]ClO4 ([3.2] and [3.3]) have been obtained. Complexes of the type [Rh(COD)(NN)]BF4 were characterized with IR and UV-vis spectroscopy, cyclic voltammetry and conductometry. The catalytic activity of the complexes was also investigated: [Rh(COD)(NN)]ClO4 for the polymerization of phenylacetylene and [Rh(COD)(NN)]BF4 for the hydroformylation of styrene.
- Full Text:
- Date Issued: 2009
- Authors: Kleyi, Phumelele Eldridge
- Date: 2009
- Subjects: Organic compounds -- Synthesis , Organic solvents , Solution (Chemistry) , Chemistry, Organic , Coordination compounds
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10393 , http://hdl.handle.net/10948/1053 , Organic compounds -- Synthesis , Organic solvents , Solution (Chemistry) , Chemistry, Organic , Coordination compounds
- Description: Solvent-free reactions possess advantages compared to the solvent route, such as shorter reaction times, less use of energy, better yields, etc. Herein, the synthesis and characterization of bisferrocenylimines and arylbisamines are described. Reduction of the above compounds with LAH resulted in the formation of bisferrocenylamines and arylbisamines, respectively. The coordination chemistry of all the above compounds to rhodium(I) is also discussed in the prepared complexes [Rh(COD)(NN)]ClO4, where NN = bisferrocenylimines, and [Rh(COD)(NN)]BF4, where NN = bisferrocenylamines and arylbisamines. X-ray crystal structures of the complexes [Rh(COD)(NN)]ClO4 ([3.2] and [3.3]) have been obtained. Complexes of the type [Rh(COD)(NN)]BF4 were characterized with IR and UV-vis spectroscopy, cyclic voltammetry and conductometry. The catalytic activity of the complexes was also investigated: [Rh(COD)(NN)]ClO4 for the polymerization of phenylacetylene and [Rh(COD)(NN)]BF4 for the hydroformylation of styrene.
- Full Text:
- Date Issued: 2009
Function of a cloned polyphenolase in organic synthesis
- Authors: Naidoo, Michael Joseph
- Date: 1995
- Subjects: Polyphenols , Catechol , Streptomacyes , Organic compounds -- Synthesis , Mutagenesis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4042 , http://hdl.handle.net/10962/d1004103 , Polyphenols , Catechol , Streptomacyes , Organic compounds -- Synthesis , Mutagenesis
- Description: The enzyme polyphenolase, which catalyses the oxidation of phenols to catechols and subsequently dehydrogenates these to o-quinones, is widely distributed in nature. The multicopy plasmid vector pIJ702 contains a mel gene from Streptomyces antibioticus, that codes for the production of a polyphenol oxidase. The plasmid was isolated from Streptomyces lividans 66pIJ702 and subjected to a variety of mutagenic treatments in order to establish a structurefunction relationship for the polyphenolase enzymes. An attempt was made to engineer the polyphenolase enzyme by localized random mutagenesis in vitro of the mel gene on pIJ702, in order to alter properties like productivity, activity and substrate specificity. It was hoped to alter the amino acid sequence of the active site of the enzyme in order to facilitate catalysis in an organic environment. The plasmid was subsequently transformed into a plasmid-free Streptomyces strain, and enzyme production was carried out in batch culture systems, in order to determine the effect of the height treatment, and to isolate and propagate functional polyphenolase mutants for organic synthesis.
- Full Text:
- Date Issued: 1995
- Authors: Naidoo, Michael Joseph
- Date: 1995
- Subjects: Polyphenols , Catechol , Streptomacyes , Organic compounds -- Synthesis , Mutagenesis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4042 , http://hdl.handle.net/10962/d1004103 , Polyphenols , Catechol , Streptomacyes , Organic compounds -- Synthesis , Mutagenesis
- Description: The enzyme polyphenolase, which catalyses the oxidation of phenols to catechols and subsequently dehydrogenates these to o-quinones, is widely distributed in nature. The multicopy plasmid vector pIJ702 contains a mel gene from Streptomyces antibioticus, that codes for the production of a polyphenol oxidase. The plasmid was isolated from Streptomyces lividans 66pIJ702 and subjected to a variety of mutagenic treatments in order to establish a structurefunction relationship for the polyphenolase enzymes. An attempt was made to engineer the polyphenolase enzyme by localized random mutagenesis in vitro of the mel gene on pIJ702, in order to alter properties like productivity, activity and substrate specificity. It was hoped to alter the amino acid sequence of the active site of the enzyme in order to facilitate catalysis in an organic environment. The plasmid was subsequently transformed into a plasmid-free Streptomyces strain, and enzyme production was carried out in batch culture systems, in order to determine the effect of the height treatment, and to isolate and propagate functional polyphenolase mutants for organic synthesis.
- Full Text:
- Date Issued: 1995
Synthesis and conformational studies of indolizines
- Authors: George, Rosemary
- Date: 1994
- Subjects: Indole alkaloids -- Research , Organic compounds -- Synthesis , Chemistry, Organic
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4367 , http://hdl.handle.net/10962/d1005032 , Indole alkaloids -- Research , Organic compounds -- Synthesis , Chemistry, Organic
- Description: The present investigation has involved a kinetic and mechanistic study of the thermal cyclization of 3-acetoxy-3-(2-pyridyl)-2-methylenepropanoate esters and related compounds to 2-substituted indolizines. Substrates for the kinetic study were prepared via the Baylis-Hillmann reaction of pyridine-2-carboxaldehydes with acrylate esters, acrylonitrile and methyl vinyl ketone. The resulting hydroxy compounds were then acetylated to afford the acetoxy derivatives, thermal cyclization of which gave the corresponding 2-substituted indolizines. The cyclization reactions was followed using 'H NMR spectroscopy and were shown to follow firstorder kinetics. The influence of the various substituents on the observed first-order rate constants has been examined and variable temperature studies have permitted evaluation of activation parameters for the formation of methyl indolizine-2-carboxylate and ethyl indolizine-2-carboxylate. An alternative route to 2-substituted indolizines via halogenated derivatives was explored and several halogenated 2-pyridyl derivatives were synthesised and their thermal cyclization to indolizines was attempted. Novel 5-methylindolizine-2-carboxamides were prepared as part of this investigation and dynamic NMR spectroscopy was used to study internal rotation about the amide N-CO bond in these compounds.
- Full Text:
- Date Issued: 1994
- Authors: George, Rosemary
- Date: 1994
- Subjects: Indole alkaloids -- Research , Organic compounds -- Synthesis , Chemistry, Organic
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4367 , http://hdl.handle.net/10962/d1005032 , Indole alkaloids -- Research , Organic compounds -- Synthesis , Chemistry, Organic
- Description: The present investigation has involved a kinetic and mechanistic study of the thermal cyclization of 3-acetoxy-3-(2-pyridyl)-2-methylenepropanoate esters and related compounds to 2-substituted indolizines. Substrates for the kinetic study were prepared via the Baylis-Hillmann reaction of pyridine-2-carboxaldehydes with acrylate esters, acrylonitrile and methyl vinyl ketone. The resulting hydroxy compounds were then acetylated to afford the acetoxy derivatives, thermal cyclization of which gave the corresponding 2-substituted indolizines. The cyclization reactions was followed using 'H NMR spectroscopy and were shown to follow firstorder kinetics. The influence of the various substituents on the observed first-order rate constants has been examined and variable temperature studies have permitted evaluation of activation parameters for the formation of methyl indolizine-2-carboxylate and ethyl indolizine-2-carboxylate. An alternative route to 2-substituted indolizines via halogenated derivatives was explored and several halogenated 2-pyridyl derivatives were synthesised and their thermal cyclization to indolizines was attempted. Novel 5-methylindolizine-2-carboxamides were prepared as part of this investigation and dynamic NMR spectroscopy was used to study internal rotation about the amide N-CO bond in these compounds.
- Full Text:
- Date Issued: 1994
- «
- ‹
- 1
- ›
- »