Acoustic biosensors
- Fogel, Ronen, Limson, Janice L, Seshia, Ashwin A
- Authors: Fogel, Ronen , Limson, Janice L , Seshia, Ashwin A
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/431648 , vital:72793 , xlink:href="https://doi.org/10.1042/EBC20150011"
- Description: Resonant and acoustic wave devices have been researched for several decades for application in the gravimetric sensing of a variety of biological and chemical analytes. These devices operate by coupling the measurand (e.g. analyte adsorption) as a modulation in the physical properties of the acoustic wave (e.g. resonant frequency, acoustic velocity, dissipation) that can then be correlated with the amount of adsorbed analyte. These devices can also be miniaturized with advantages in terms of cost, size and scalability, as well as potential additional features including integration with microfluidics and electronics, scaled sensitivities associated with smaller dimensions and higher operational frequencies, the ability to multiplex detection across arrays of hundreds of devices embedded in a single chip, increased throughput and the ability to interrogate a wider range of modes including within the same device. Additionally, device fabrication is often compatible with semiconductor volume batch manufacturing techniques enabling cost scalability and a high degree of precision and reproducibility in the manufacturing process. Integration with microfluidics handling also enables suitable sample pre-processing/separation/purification/amplification steps that could improve selectivity and the overall signal-to-noise ratio. Three device types are reviewed here: (i) bulk acoustic wave sensors, (ii) surface acoustic wave sensors, and (iii) micro/nano-electromechanical system (MEMS/NEMS) sensors.
- Full Text:
- Date Issued: 2016
- Authors: Fogel, Ronen , Limson, Janice L , Seshia, Ashwin A
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/431648 , vital:72793 , xlink:href="https://doi.org/10.1042/EBC20150011"
- Description: Resonant and acoustic wave devices have been researched for several decades for application in the gravimetric sensing of a variety of biological and chemical analytes. These devices operate by coupling the measurand (e.g. analyte adsorption) as a modulation in the physical properties of the acoustic wave (e.g. resonant frequency, acoustic velocity, dissipation) that can then be correlated with the amount of adsorbed analyte. These devices can also be miniaturized with advantages in terms of cost, size and scalability, as well as potential additional features including integration with microfluidics and electronics, scaled sensitivities associated with smaller dimensions and higher operational frequencies, the ability to multiplex detection across arrays of hundreds of devices embedded in a single chip, increased throughput and the ability to interrogate a wider range of modes including within the same device. Additionally, device fabrication is often compatible with semiconductor volume batch manufacturing techniques enabling cost scalability and a high degree of precision and reproducibility in the manufacturing process. Integration with microfluidics handling also enables suitable sample pre-processing/separation/purification/amplification steps that could improve selectivity and the overall signal-to-noise ratio. Three device types are reviewed here: (i) bulk acoustic wave sensors, (ii) surface acoustic wave sensors, and (iii) micro/nano-electromechanical system (MEMS/NEMS) sensors.
- Full Text:
- Date Issued: 2016
Photophysicochemical properties and in vitro cytotoxicity of zinc tetracarboxyphenoxy phthalocyanine–quantum dot nanocomposites
- Oluwole, David O, Tilbury, Chelsea M, Prinsloo, Earl, Limson, Janice L, Nyokong, Tebello
- Authors: Oluwole, David O , Tilbury, Chelsea M , Prinsloo, Earl , Limson, Janice L , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/240846 , vital:50878 , xlink:href="https://doi.org/10.1016/j.poly.2015.12.060"
- Description: Cadmium based quantum dots (QDs) capped with two different ligands (thioglycolic acid, TGA, and glutathione, GSH) were synthesized. The QDs are: CdTe, CdTe/ZnO, CdTeSe, CdTeSe/ZnO and CdSe/ZnS (the last one for TGA only). Cytotoxicity of the QDs against MCF-7 epithelial breast cancer was evaluated. The TGA capped core QDs were found to be highly cytotoxic to the cell lines when compared to GSH capped ones. The glutathione capped QDs were covalently linked to zinc tetracarboxyphenoxy phthalocyanine (ZnTCPPc). Cytotoxicity and photophysicochemical properties of the conjugates were investigated. The toxicity of the core QDs was reduced in the presence of ZnTCPPc. Enhanced triplet quantum yields and long triplet lifetimes were obtained for ZnTCPPc in the presence of all QDs.
- Full Text:
- Date Issued: 2015
- Authors: Oluwole, David O , Tilbury, Chelsea M , Prinsloo, Earl , Limson, Janice L , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/240846 , vital:50878 , xlink:href="https://doi.org/10.1016/j.poly.2015.12.060"
- Description: Cadmium based quantum dots (QDs) capped with two different ligands (thioglycolic acid, TGA, and glutathione, GSH) were synthesized. The QDs are: CdTe, CdTe/ZnO, CdTeSe, CdTeSe/ZnO and CdSe/ZnS (the last one for TGA only). Cytotoxicity of the QDs against MCF-7 epithelial breast cancer was evaluated. The TGA capped core QDs were found to be highly cytotoxic to the cell lines when compared to GSH capped ones. The glutathione capped QDs were covalently linked to zinc tetracarboxyphenoxy phthalocyanine (ZnTCPPc). Cytotoxicity and photophysicochemical properties of the conjugates were investigated. The toxicity of the core QDs was reduced in the presence of ZnTCPPc. Enhanced triplet quantum yields and long triplet lifetimes were obtained for ZnTCPPc in the presence of all QDs.
- Full Text:
- Date Issued: 2015
Characterization of manganese tetraarylthiosubstituted phthalocyanines self assembled monolayers
- Matemadombo, Fungisai, Durmus, Mahmut, Togo, Chamunorwa, Limson, Janice L, Nyokong, Tebello
- Authors: Matemadombo, Fungisai , Durmus, Mahmut , Togo, Chamunorwa , Limson, Janice L , Nyokong, Tebello
- Date: 2009
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/263364 , vital:53621 , xlink:href="https://doi.org/10.1016/j.electacta.2009.04.059"
- Description: Manganese tetraarylthiosubstituted phthalocyanines (complexes 1–5) have been deposited on Au electrode surfaces through the self assembled monolayer (SAM) technique. SAM characteristics reported in this work are: ion barrier factor (∼1); interfacial capacitance (303–539 μF cm−2) and surface coverage (1.06 × 10−10–2.80 × 10−10 mol cm−2). Atomic force microscopy was employed in characterizing a SAM. SAMs of complexes 1–5 were employed to detect L-cysteine (with limit of detection ranging from 2.83 × 10−7 to 3.14 × 10−7 M at potentials of 0.68–0.75 V vs. Ag|AgCl) and nitrite (limit of detection ranging from 1.78 × 10−7 to 3.02 × 10−7 M at potentials of 0.69–0.76 V vs. Ag|AgCl).
- Full Text:
- Date Issued: 2009
- Authors: Matemadombo, Fungisai , Durmus, Mahmut , Togo, Chamunorwa , Limson, Janice L , Nyokong, Tebello
- Date: 2009
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/263364 , vital:53621 , xlink:href="https://doi.org/10.1016/j.electacta.2009.04.059"
- Description: Manganese tetraarylthiosubstituted phthalocyanines (complexes 1–5) have been deposited on Au electrode surfaces through the self assembled monolayer (SAM) technique. SAM characteristics reported in this work are: ion barrier factor (∼1); interfacial capacitance (303–539 μF cm−2) and surface coverage (1.06 × 10−10–2.80 × 10−10 mol cm−2). Atomic force microscopy was employed in characterizing a SAM. SAMs of complexes 1–5 were employed to detect L-cysteine (with limit of detection ranging from 2.83 × 10−7 to 3.14 × 10−7 M at potentials of 0.68–0.75 V vs. Ag|AgCl) and nitrite (limit of detection ranging from 1.78 × 10−7 to 3.02 × 10−7 M at potentials of 0.69–0.76 V vs. Ag|AgCl).
- Full Text:
- Date Issued: 2009
Synthesis, electrochemical characterization of tetra-and octa-substituted dodecyl-mercapto tin phthalocyanines in solution and as self-assembled monolayers
- Khene, Samson M, Geraldo, Daniela A, Togo, Chamunorwa A, Limson, Janice L, Nyokong, Tebello
- Authors: Khene, Samson M , Geraldo, Daniela A , Togo, Chamunorwa A , Limson, Janice L , Nyokong, Tebello
- Date: 2008
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/264541 , vital:53743 , xlink:href="https://doi.org/10.1016/j.electacta.2008.08.018"
- Description: Non-peripherally (α) tetra- (9) and octa-(7) substituted dodecyl-mercapto tin(IV) phthalocyanines were synthesized and their electrochemical behavior studied. Cyclic voltammetry and spectroelectrochemistry show ring-based reductions for 7 and 9, the former shows two ring oxidations, while the latter shows only one ring-based oxidation. The adsorption kinetics of (7) and (9) on gold electrode were investigated by electrochemical impedance spectroscopy (EIS). The equilibrium constant (K) for the adsorption and the Gibbs free energy (ΔGads) of the SAMs were evaluated based on the Frumkin isotherm.
- Full Text:
- Date Issued: 2008
- Authors: Khene, Samson M , Geraldo, Daniela A , Togo, Chamunorwa A , Limson, Janice L , Nyokong, Tebello
- Date: 2008
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/264541 , vital:53743 , xlink:href="https://doi.org/10.1016/j.electacta.2008.08.018"
- Description: Non-peripherally (α) tetra- (9) and octa-(7) substituted dodecyl-mercapto tin(IV) phthalocyanines were synthesized and their electrochemical behavior studied. Cyclic voltammetry and spectroelectrochemistry show ring-based reductions for 7 and 9, the former shows two ring oxidations, while the latter shows only one ring-based oxidation. The adsorption kinetics of (7) and (9) on gold electrode were investigated by electrochemical impedance spectroscopy (EIS). The equilibrium constant (K) for the adsorption and the Gibbs free energy (ΔGads) of the SAMs were evaluated based on the Frumkin isotherm.
- Full Text:
- Date Issued: 2008
Substituted catechols as complexing agents for the determination of bismuth, lead, copper and cadmium by adsorptive stripping voltammetry
- Limson, Janice L, Nyokong, Tebello
- Authors: Limson, Janice L , Nyokong, Tebello
- Date: 1997
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/293311 , vital:57074 , xlink:href="https://doi.org/10.1016/S0003-2670(96)00585-5"
- Description: Copper, cadmium, lead and bismuth (> 5 μg ml−1) are determined by adsorptive cathodic stripping voltammetry (AdCSV) on a mercury film glassy carbon electrode, using catechol, 4-methylcatechol, 4-t-butylcatechol and resorcinol as complexing ligands. Complexes of lead, copper and bismuth with resorcinol showed the largest increase in current with increase in metal concentration, whereas complexes of these metals with 4-t-butylcatechol showed the lowest current response. Cadmium showed a different behaviour from the other three metals in that the highest current response was observed with 4-methylcatechol. The four metals could be determined simultaneously in the presence of resorcinol, although considerable interference was observed between bismuth and copper.
- Full Text:
- Date Issued: 1997
- Authors: Limson, Janice L , Nyokong, Tebello
- Date: 1997
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/293311 , vital:57074 , xlink:href="https://doi.org/10.1016/S0003-2670(96)00585-5"
- Description: Copper, cadmium, lead and bismuth (> 5 μg ml−1) are determined by adsorptive cathodic stripping voltammetry (AdCSV) on a mercury film glassy carbon electrode, using catechol, 4-methylcatechol, 4-t-butylcatechol and resorcinol as complexing ligands. Complexes of lead, copper and bismuth with resorcinol showed the largest increase in current with increase in metal concentration, whereas complexes of these metals with 4-t-butylcatechol showed the lowest current response. Cadmium showed a different behaviour from the other three metals in that the highest current response was observed with 4-methylcatechol. The four metals could be determined simultaneously in the presence of resorcinol, although considerable interference was observed between bismuth and copper.
- Full Text:
- Date Issued: 1997
- «
- ‹
- 1
- ›
- »