Synthesis and nonlinear optical examination of 3 (4), 15 (16)-Bis-(4-tert-butyl-phenoxy)-10, 22-diaminohemiporphyrazinato chloroindium
- Britton, Jonathan, Antunes, Edith M, Nyokong, Tebello
- Authors: Britton, Jonathan , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241739 , vital:50965 , xlink:href="https://doi.org/10.1016/j.molstruc.2013.05.001"
- Description: 3(4),15(16)-Bis-(4-tert-butyl-phenoxy)-10,22-diaminohemiporphyrazinato chloroindium hemiporphyrazine was synthesized from 1,3,5-triaminobenzene and 4-tert-butyl-phenoxyisoindoline. The structure of the complex was confirmed using mass, nuclear magnetic resonance and infrared spectroscopies. The nonlinear parameters of the compound was also analyzed in dimethylformamide and found to be significantly greater than previously analyzed phthalocyanines.
- Full Text:
- Date Issued: 2013
- Authors: Britton, Jonathan , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241739 , vital:50965 , xlink:href="https://doi.org/10.1016/j.molstruc.2013.05.001"
- Description: 3(4),15(16)-Bis-(4-tert-butyl-phenoxy)-10,22-diaminohemiporphyrazinato chloroindium hemiporphyrazine was synthesized from 1,3,5-triaminobenzene and 4-tert-butyl-phenoxyisoindoline. The structure of the complex was confirmed using mass, nuclear magnetic resonance and infrared spectroscopies. The nonlinear parameters of the compound was also analyzed in dimethylformamide and found to be significantly greater than previously analyzed phthalocyanines.
- Full Text:
- Date Issued: 2013
Synthesis and photophysicochemical properties of zinc phthalocyanine derivatized with benzothiazole or carbazole photosensitizers
- Khoza, Phindile, Antunes, Edith M, Nyokong, Tebello
- Authors: Khoza, Phindile , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241728 , vital:50964 , xlink:href="https://doi.org/10.1016/j.poly.2013.05.046"
- Description: The synthesis of new zinc phthalocyanine complexes containing 3-(2-benzothiazol-2-yloxy) (complex 3) and 3-(carbazol-2-yloxy) (complex 4) substituents at the non-peripheral positions are reported. The new compounds were characterized by elemental analysis, FT-IR, 1H NMR, mass spectrometry and UV–Vis spectroscopy. The effects of carbazole and benzothiazole substitutents on the photophysical and photochemical parameters of ZnPc are reported. These new phthalocyanines are non-aggregated in common solvents and show improved photophysicochemical properties. The 3-(2-benzothiazol-2-yloxy) substituted complex showed the longest triplet lifetime ever reported for a zinc phthalocyanine (1.7 ms).
- Full Text:
- Date Issued: 2013
- Authors: Khoza, Phindile , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241728 , vital:50964 , xlink:href="https://doi.org/10.1016/j.poly.2013.05.046"
- Description: The synthesis of new zinc phthalocyanine complexes containing 3-(2-benzothiazol-2-yloxy) (complex 3) and 3-(carbazol-2-yloxy) (complex 4) substituents at the non-peripheral positions are reported. The new compounds were characterized by elemental analysis, FT-IR, 1H NMR, mass spectrometry and UV–Vis spectroscopy. The effects of carbazole and benzothiazole substitutents on the photophysical and photochemical parameters of ZnPc are reported. These new phthalocyanines are non-aggregated in common solvents and show improved photophysicochemical properties. The 3-(2-benzothiazol-2-yloxy) substituted complex showed the longest triplet lifetime ever reported for a zinc phthalocyanine (1.7 ms).
- Full Text:
- Date Issued: 2013
Synthesis and photophysicochemical studies of a water soluble conjugate between folic acid and zinc tetraaminophthalocyanine
- Khoza, Phindile, Antunes, Edith M, Chen, Ji-Yao, Nyokong, Tebello
- Authors: Khoza, Phindile , Antunes, Edith M , Chen, Ji-Yao , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242142 , vital:51005 , xlink:href="https://doi.org/10.1016/j.jlumin.2012.06.048"
- Description: This work reports on the synthesis of zinc tetraaminophthalocyanine (ZnTAPc) functionalized with folic acid (FA), forming ZnTAPcFA. The conjugate between FA and ZnTAPc was soluble in water whereas ZnTAPc alone is not. The structure of ZnTAPcFA conjugate was elucidated by 1H NMR, MALDI-TOF mass and FTIR spectra. Photophysical and photochemical studies of ZnTAPcFA were conducted in DMSO. The increase in fluorescence quantum yield of the conjugate was accompanied by a decrease in the triplet and singlet oxygen quantum yields. The changes in triplet quantum and singlet oxygen quantum yields were marginal when ZnTAPc was simply mixed with FA without a chemical bond.
- Full Text:
- Date Issued: 2013
- Authors: Khoza, Phindile , Antunes, Edith M , Chen, Ji-Yao , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242142 , vital:51005 , xlink:href="https://doi.org/10.1016/j.jlumin.2012.06.048"
- Description: This work reports on the synthesis of zinc tetraaminophthalocyanine (ZnTAPc) functionalized with folic acid (FA), forming ZnTAPcFA. The conjugate between FA and ZnTAPc was soluble in water whereas ZnTAPc alone is not. The structure of ZnTAPcFA conjugate was elucidated by 1H NMR, MALDI-TOF mass and FTIR spectra. Photophysical and photochemical studies of ZnTAPcFA were conducted in DMSO. The increase in fluorescence quantum yield of the conjugate was accompanied by a decrease in the triplet and singlet oxygen quantum yields. The changes in triplet quantum and singlet oxygen quantum yields were marginal when ZnTAPc was simply mixed with FA without a chemical bond.
- Full Text:
- Date Issued: 2013
Synthesis and physicochemical behaviour of aluminium bis and tris (diammine platinum) octacarboxyphthalocyanine
- Malinga, Nduduzo, Antunes, Edith M, Nyokong, Tebello
- Authors: Malinga, Nduduzo , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241970 , vital:50988 , xlink:href="https://doi.org/10.1016/j.poly.2013.02.073"
- Description: Hydroxy aluminium octacarboxy phthalocyanine (Al(OH)OCPc) was conjugated with a diammine platinum complex to give conjugates containing two or three platinum complexes (represented as: Al(OH)OCPc(Pt)2 and Al(OH)OCPc(Pt)3). It was found that the complexes were soluble in water at a pH > 8.2. Both conjugates were found to have two fluorescence lifetimes. The triplet and singlet oxygen quantum yields increased for the conjugates compared to Al(OH)OCPc alone.
- Full Text:
- Date Issued: 2013
- Authors: Malinga, Nduduzo , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241970 , vital:50988 , xlink:href="https://doi.org/10.1016/j.poly.2013.02.073"
- Description: Hydroxy aluminium octacarboxy phthalocyanine (Al(OH)OCPc) was conjugated with a diammine platinum complex to give conjugates containing two or three platinum complexes (represented as: Al(OH)OCPc(Pt)2 and Al(OH)OCPc(Pt)3). It was found that the complexes were soluble in water at a pH > 8.2. Both conjugates were found to have two fluorescence lifetimes. The triplet and singlet oxygen quantum yields increased for the conjugates compared to Al(OH)OCPc alone.
- Full Text:
- Date Issued: 2013
The development of catalytic oxovanadium (IV)-containing microspheres for the oxidation of various organosulfur compounds
- Ogunlaja, Adeniyi S, Khene, Samson M, Antunes, Edith M, Nyokong, Tebello, Torto, Nelson, Tshentu, Zenixole R
- Authors: Ogunlaja, Adeniyi S , Khene, Samson M , Antunes, Edith M , Nyokong, Tebello , Torto, Nelson , Tshentu, Zenixole R
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241783 , vital:50969 , xlink:href="https://doi.org/10.1016/j.apcata.2013.05.004"
- Description: The development of poly[allylSB-co-EGDMA] beads containing a tetradentate ligand was achieved via suspension polymerization. The catalyst poly[allylSB-co-EGDMA]-VO was synthesized by reacting VIVOSO4 with poly[allylSB-co-EGDMA]. XPS and EPR were used to confirm the presence of vanadium (V4+) on the beads. The synthesized catalyst (poly[allylSB-co-EGDMA]-VO) was found to have a BET surface area of 22 m2 g−1 and porosity of 135 Å, with the atomic force microscopy (AFM) showing more insight on the porous nature of the beads. Oxidation of thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) was carried out using tert-butyl hydroperoxide (t-BuOOH) as oxidant. An overall conversion of 60%, 82%, 98% and 87% was achieved for thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6 dimethyldibenzothiophene (4,6-DMDBT) respectively at higher (t-BuOOH) to substrate ratio and at a temperature of 40 °C. The efficient oxidation of the various organosulfur compounds presents potential for the possible application of this catalyst in oxidative desulfurization (ODS) of crude oil.
- Full Text:
- Date Issued: 2013
- Authors: Ogunlaja, Adeniyi S , Khene, Samson M , Antunes, Edith M , Nyokong, Tebello , Torto, Nelson , Tshentu, Zenixole R
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241783 , vital:50969 , xlink:href="https://doi.org/10.1016/j.apcata.2013.05.004"
- Description: The development of poly[allylSB-co-EGDMA] beads containing a tetradentate ligand was achieved via suspension polymerization. The catalyst poly[allylSB-co-EGDMA]-VO was synthesized by reacting VIVOSO4 with poly[allylSB-co-EGDMA]. XPS and EPR were used to confirm the presence of vanadium (V4+) on the beads. The synthesized catalyst (poly[allylSB-co-EGDMA]-VO) was found to have a BET surface area of 22 m2 g−1 and porosity of 135 Å, with the atomic force microscopy (AFM) showing more insight on the porous nature of the beads. Oxidation of thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) was carried out using tert-butyl hydroperoxide (t-BuOOH) as oxidant. An overall conversion of 60%, 82%, 98% and 87% was achieved for thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6 dimethyldibenzothiophene (4,6-DMDBT) respectively at higher (t-BuOOH) to substrate ratio and at a temperature of 40 °C. The efficient oxidation of the various organosulfur compounds presents potential for the possible application of this catalyst in oxidative desulfurization (ODS) of crude oil.
- Full Text:
- Date Issued: 2013
The development of novel nickel selective amine extractants
- Okewole, Adeleye I, Antunes, Edith M, Nyokong, Tebello, Tshentu, Zenixole R
- Authors: Okewole, Adeleye I , Antunes, Edith M , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241641 , vital:50957 , xlink:href="https://doi.org/10.1016/j.mineng.2013.04.019"
- Description: A chelating ion exchanger, prepared by functionalising Merrifield resin with 2,2′-pyridylimidazole, was utilized to selectively adsorb and separate nickel from other base metal ions in synthetic sulfate solutions. The sorbent material was characterized by scanning electron microscopy (SEM), microanalysis, infrared (IR), X-ray photoelectron spectroscopy (XPS) and BET surface area. The distribution ratio (D) and the sorption capacity of the microspheres toward Ni(II), Cu(II), Co(II) and Fe(II) ions was studied by using the batch and column methods, respectively. Ni(II) followed by Cu(II) showed the highest distribution ratio (D) and the highest sorption efficiency of nickel(II) ions around pH 2. The binary separation of nickel(II) from copper(II), cobalt(II) and iron(II) respectively, undertaken in a column study, through loading the metal ions at pH ≈ 2 followed by selective decomplexation, demonstrated the selectivity of the sorbent material for nickel(II). Thus, 2,2′-pyridylimidazole can be regarded as a nickel-specific extractant.
- Full Text:
- Date Issued: 2013
- Authors: Okewole, Adeleye I , Antunes, Edith M , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241641 , vital:50957 , xlink:href="https://doi.org/10.1016/j.mineng.2013.04.019"
- Description: A chelating ion exchanger, prepared by functionalising Merrifield resin with 2,2′-pyridylimidazole, was utilized to selectively adsorb and separate nickel from other base metal ions in synthetic sulfate solutions. The sorbent material was characterized by scanning electron microscopy (SEM), microanalysis, infrared (IR), X-ray photoelectron spectroscopy (XPS) and BET surface area. The distribution ratio (D) and the sorption capacity of the microspheres toward Ni(II), Cu(II), Co(II) and Fe(II) ions was studied by using the batch and column methods, respectively. Ni(II) followed by Cu(II) showed the highest distribution ratio (D) and the highest sorption efficiency of nickel(II) ions around pH 2. The binary separation of nickel(II) from copper(II), cobalt(II) and iron(II) respectively, undertaken in a column study, through loading the metal ions at pH ≈ 2 followed by selective decomplexation, demonstrated the selectivity of the sorbent material for nickel(II). Thus, 2,2′-pyridylimidazole can be regarded as a nickel-specific extractant.
- Full Text:
- Date Issued: 2013
The interaction of silver nanoparticles with low symmetry cysteinyl metallophthalocyanines and their antimicrobial effect
- Masilela, Nkosiphile, Nyokong, Tebello
- Authors: Masilela, Nkosiphile , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193735 , vital:45391 , xlink:href="https://doi.org/10.1016/j.jphotochem.2013.01.009"
- Description: This work reports on the synthesis of silver nanoparticles and their antimicrobial activity alone and in the presence of low symmetry phthalocyanines. The photochemical behaviour of various low symmetry phthalocyanines in the presence of AgNPs is investigated in DMF. A slight improvement in the photochemical behaviour and antimicrobial activity was achieved in the presence of AgNPs for all the complexes. The spherically shaped AgNPs gave the highest antimicrobial activity compared to the triangular and cubic structures. The (OH)2GeMCsPc complex gave the highest antimicrobial activity towards Staphylococcus aureas, both alone and in the presence of AgNPs under illumination with light.
- Full Text:
- Date Issued: 2013
- Authors: Masilela, Nkosiphile , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193735 , vital:45391 , xlink:href="https://doi.org/10.1016/j.jphotochem.2013.01.009"
- Description: This work reports on the synthesis of silver nanoparticles and their antimicrobial activity alone and in the presence of low symmetry phthalocyanines. The photochemical behaviour of various low symmetry phthalocyanines in the presence of AgNPs is investigated in DMF. A slight improvement in the photochemical behaviour and antimicrobial activity was achieved in the presence of AgNPs for all the complexes. The spherically shaped AgNPs gave the highest antimicrobial activity compared to the triangular and cubic structures. The (OH)2GeMCsPc complex gave the highest antimicrobial activity towards Staphylococcus aureas, both alone and in the presence of AgNPs under illumination with light.
- Full Text:
- Date Issued: 2013
The photophysical and photochemical behaviour of coumarin-derivatized zinc phthalocyanine when conjugated with gold nanoparticles and electrospun into polymer fibers
- Tombe, Sekai, Antunes, Edith M, Nyokong, Tebello
- Authors: Tombe, Sekai , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/232534 , vital:50000 , xlink:href="https://doi.org/10.1039/C2NJ40984D"
- Description: Polymer composite fibers doped with phthalocyanines and phthalocyanine-functionalized gold nanoparticles were developed. The phthalocyanine and phthalocyanine-functionalized gold nanoparticles have been characterized using UV/Vis, fluorescence and X-ray photoelectron spectroscopy (XPS), time correlated single photon counting (TCSPC), time-resolved emission spectra (TRES) and transmission electron microscopy (TEM). The changes in photophysical and photochemical behavior of the phthalocyanines induced by their interaction with gold nanoparticles and polystyrene were also investigated. In the presence of gold nanoparticles, the fluorescence lifetimes and quantum yields of the phthalocyanine decreased, whereas the singlet oxygen quantum yield increased. This work shows that polymer composite fibers could be used as functional fibers for a variety of applications such as gas sensing when using the advantageous properties of phthalocyanines and gold nanoparticles.
- Full Text:
- Date Issued: 2013
- Authors: Tombe, Sekai , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/232534 , vital:50000 , xlink:href="https://doi.org/10.1039/C2NJ40984D"
- Description: Polymer composite fibers doped with phthalocyanines and phthalocyanine-functionalized gold nanoparticles were developed. The phthalocyanine and phthalocyanine-functionalized gold nanoparticles have been characterized using UV/Vis, fluorescence and X-ray photoelectron spectroscopy (XPS), time correlated single photon counting (TCSPC), time-resolved emission spectra (TRES) and transmission electron microscopy (TEM). The changes in photophysical and photochemical behavior of the phthalocyanines induced by their interaction with gold nanoparticles and polystyrene were also investigated. In the presence of gold nanoparticles, the fluorescence lifetimes and quantum yields of the phthalocyanine decreased, whereas the singlet oxygen quantum yield increased. This work shows that polymer composite fibers could be used as functional fibers for a variety of applications such as gas sensing when using the advantageous properties of phthalocyanines and gold nanoparticles.
- Full Text:
- Date Issued: 2013
The synthesis and characterisation of magnetic nanoparticles and their interaction with a zinc phthalocyanine
- Antunes, Edith M, Rapulenyane, Nomasonto, Ledwaba, Mpho, Litwinski, Christian, Chidawanyika, Wadzanai J U, Nyokong, Tebello
- Authors: Antunes, Edith M , Rapulenyane, Nomasonto , Ledwaba, Mpho , Litwinski, Christian , Chidawanyika, Wadzanai J U , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242111 , vital:51002 , xlink:href="https://doi.org/10.1016/j.inoche.2012.12.010"
- Description: A variety of nanoparticles (NPs), including FePt nanoparticles with Fe as the shell (2) or Pt as the shell (3), Pt NPs (4), and FePd (5) were synthesised, characterised and their effect on a zinc phthalocyanine (1) tetra-substituted with a pyridyl-oxy substituent studied using UV/Vis and fluorescence spectroscopy (including time correlated single photon counting, TCSPC). The nanoparticles were characterised using a number of techniques including UV/Vis and inductively coupled plasma-optical emission (ICP-OES) spectroscopies, transmission electron microscopy (TEM), differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) and electron paramagnetic resonance (EPR) spectroscopy. Nanocomposites (NCs, 6,7) where the ZnPc (1) was used as the stabiliser, instead of oleic acid and or oleylamine, were also synthesised and characterised.
- Full Text:
- Date Issued: 2013
- Authors: Antunes, Edith M , Rapulenyane, Nomasonto , Ledwaba, Mpho , Litwinski, Christian , Chidawanyika, Wadzanai J U , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242111 , vital:51002 , xlink:href="https://doi.org/10.1016/j.inoche.2012.12.010"
- Description: A variety of nanoparticles (NPs), including FePt nanoparticles with Fe as the shell (2) or Pt as the shell (3), Pt NPs (4), and FePd (5) were synthesised, characterised and their effect on a zinc phthalocyanine (1) tetra-substituted with a pyridyl-oxy substituent studied using UV/Vis and fluorescence spectroscopy (including time correlated single photon counting, TCSPC). The nanoparticles were characterised using a number of techniques including UV/Vis and inductively coupled plasma-optical emission (ICP-OES) spectroscopies, transmission electron microscopy (TEM), differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) and electron paramagnetic resonance (EPR) spectroscopy. Nanocomposites (NCs, 6,7) where the ZnPc (1) was used as the stabiliser, instead of oleic acid and or oleylamine, were also synthesised and characterised.
- Full Text:
- Date Issued: 2013
Third order nonlinear optical properties of phthalocyanines in the presence nanomaterials and in polymer thin films
- Britton, Jonathan, Durmus, Mahmut, Khene, Samson M, Chauke, Vongani, Nyokong, Tebello
- Authors: Britton, Jonathan , Durmus, Mahmut , Khene, Samson M , Chauke, Vongani , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241772 , vital:50968 , xlink:href="https://doi.org/10.1142/S108842461350003X"
- Description: Third order nonlinear optical properties were determined for phthalocyanine complexes 1–10 containing In, Ga and Zn central metals and tetra- or octa-substituted with benzyloxyphenoxy, phenoxy, tert-butylphenoxy and amino groups at peripheral or non-peripheral positions. The phthalocyanines were embedded in poly (methyl methacrylate) polymer in the presence of CdTe quantum dots. All complexes 1–10 were studied in the presence of CdTe quantum dots and embedded in poly (methyl methacrylate) to form thin films. Complex 3 tetrasubstituted with tert-butylphenoxy groups at non-peripheral positions was also studied in the presence of CdS, CdSe quantum dots, fullerenes, single walled carbon nanotubes. Third order nonlinear optical parameters generally increase for Pcs in the presence of CdTe quantum dots.
- Full Text:
- Date Issued: 2013
- Authors: Britton, Jonathan , Durmus, Mahmut , Khene, Samson M , Chauke, Vongani , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241772 , vital:50968 , xlink:href="https://doi.org/10.1142/S108842461350003X"
- Description: Third order nonlinear optical properties were determined for phthalocyanine complexes 1–10 containing In, Ga and Zn central metals and tetra- or octa-substituted with benzyloxyphenoxy, phenoxy, tert-butylphenoxy and amino groups at peripheral or non-peripheral positions. The phthalocyanines were embedded in poly (methyl methacrylate) polymer in the presence of CdTe quantum dots. All complexes 1–10 were studied in the presence of CdTe quantum dots and embedded in poly (methyl methacrylate) to form thin films. Complex 3 tetrasubstituted with tert-butylphenoxy groups at non-peripheral positions was also studied in the presence of CdS, CdSe quantum dots, fullerenes, single walled carbon nanotubes. Third order nonlinear optical parameters generally increase for Pcs in the presence of CdTe quantum dots.
- Full Text:
- Date Issued: 2013
Ultrafast Photodynamics of the Indoline Dye D149 Adsorbed to Porous ZnO in Dye‐Sensitized Solar Cells
- Rohwer, Egmont, Richter, Christoph, Heming, Nadine, Strauch, Kerstin, Litwinski, Christian, Nyokong, Tebello, Schlettwein, Derck, Schwoerer, Heinrich
- Authors: Rohwer, Egmont , Richter, Christoph , Heming, Nadine , Strauch, Kerstin , Litwinski, Christian , Nyokong, Tebello , Schlettwein, Derck , Schwoerer, Heinrich
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242153 , vital:51006 , xlink:href="https://doi.org/10.1002/cphc.201200715"
- Description: We investigate the ultrafast dynamics of the photoinduced electron transfer between surface-adsorbed indoline D149 dye and porous ZnO as used in the working electrodes of dye-sensitized solar cells. Transient absorption spectroscopy was conducted on the dye in solution, on solid state samples and for the latter in contact to a I−/I3− redox electrolyte typical for dye-sensitized solar cells to elucidate the effect of each component in the observed dynamics. D149 in a solution of 1:1 acetonitrile and tert-butyl alcohol shows excited-state lifetimes of 300±50 ps. This signature is severely quenched when D149 is adsorbed to ZnO, with the fastest component of the decay trace measured at 150±20 fs due to the charge-transfer mechanism. Absorption bands of the oxidized dye molecule were investigated to determine regeneration times which are in excess of 1 ns. The addition of the redox electrolyte to the system results in faster regeneration times, of the order of 1 ns.
- Full Text:
- Date Issued: 2013
- Authors: Rohwer, Egmont , Richter, Christoph , Heming, Nadine , Strauch, Kerstin , Litwinski, Christian , Nyokong, Tebello , Schlettwein, Derck , Schwoerer, Heinrich
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242153 , vital:51006 , xlink:href="https://doi.org/10.1002/cphc.201200715"
- Description: We investigate the ultrafast dynamics of the photoinduced electron transfer between surface-adsorbed indoline D149 dye and porous ZnO as used in the working electrodes of dye-sensitized solar cells. Transient absorption spectroscopy was conducted on the dye in solution, on solid state samples and for the latter in contact to a I−/I3− redox electrolyte typical for dye-sensitized solar cells to elucidate the effect of each component in the observed dynamics. D149 in a solution of 1:1 acetonitrile and tert-butyl alcohol shows excited-state lifetimes of 300±50 ps. This signature is severely quenched when D149 is adsorbed to ZnO, with the fastest component of the decay trace measured at 150±20 fs due to the charge-transfer mechanism. Absorption bands of the oxidized dye molecule were investigated to determine regeneration times which are in excess of 1 ns. The addition of the redox electrolyte to the system results in faster regeneration times, of the order of 1 ns.
- Full Text:
- Date Issued: 2013
X-ray photoelectron spectroscopy analysis of the effect of alkyl-and arylthio substituents on manganese phthalocyanines for self-assembled monolayer formation on gold
- Coates, Megan, Nyokong, Tebello
- Authors: Coates, Megan , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/190490 , vital:44999 , xlink:href="https://doi.org/10.1016/j.elecom.2013.03.019"
- Description: Self-assembled monolayers of an octa-substituted alkylthio and arylthio manganese phthalocyanines were formed on gold. X-ray photoelectron spectroscopy was used to analyse both of the phthalocyanine layers on gold. Approximately 60% of the sulphur groups in the aryl substituted-SAM surface were bound to gold through the cleavage of the C S bond, as opposed to only 37% for the alkyl substituted-SAM.
- Full Text:
- Date Issued: 2013
- Authors: Coates, Megan , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/190490 , vital:44999 , xlink:href="https://doi.org/10.1016/j.elecom.2013.03.019"
- Description: Self-assembled monolayers of an octa-substituted alkylthio and arylthio manganese phthalocyanines were formed on gold. X-ray photoelectron spectroscopy was used to analyse both of the phthalocyanine layers on gold. Approximately 60% of the sulphur groups in the aryl substituted-SAM surface were bound to gold through the cleavage of the C S bond, as opposed to only 37% for the alkyl substituted-SAM.
- Full Text:
- Date Issued: 2013
Zinc (II) 2, 9, 16, 23-tetrakis [4-(N-methylpyridyloxy)]-phthalocyanine anchored on an electrospun polysulfone polymer fiber: Application for photosensitized conversion of methyl orange
- Zugle, Ruphino, Nyokong, Tebello
- Authors: Zugle, Ruphino , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/232741 , vital:50020 , xlink:href="https://doi.org/10.1016/j.molcata.2012.10.001"
- Description: In this work, a comparative study of photodegradation of methyl orange, an azo dye, in homogeneous aqueous solution of a quarternized cationic zinc phthalocyanine and a heterogeneous catalytic system based on the same phthalocyanine anchored on polysulfone polymer fiber is presented. In both cases, conversion involved the azo bond of the dye with no detectable opening up of the aromatic benzene rings. The reaction kinetics in both cases were consistent with first order with the conversion occurring in the homogeneous system being faster than when the functionalized polymer fiber was used. The reaction products consisted of a coupling product as well as a series of oligopolymeric products.
- Full Text:
- Date Issued: 2013
- Authors: Zugle, Ruphino , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/232741 , vital:50020 , xlink:href="https://doi.org/10.1016/j.molcata.2012.10.001"
- Description: In this work, a comparative study of photodegradation of methyl orange, an azo dye, in homogeneous aqueous solution of a quarternized cationic zinc phthalocyanine and a heterogeneous catalytic system based on the same phthalocyanine anchored on polysulfone polymer fiber is presented. In both cases, conversion involved the azo bond of the dye with no detectable opening up of the aromatic benzene rings. The reaction kinetics in both cases were consistent with first order with the conversion occurring in the homogeneous system being faster than when the functionalized polymer fiber was used. The reaction products consisted of a coupling product as well as a series of oligopolymeric products.
- Full Text:
- Date Issued: 2013
4-Azidoaniline-based electropolymer as a building block for functionalisation of conductive surfaces
- Coates, Megan, Elamari, Hichem, Girard, Christian, Griveau, Sophie, Nyokong, Tebello, Bedioui, Fethi
- Authors: Coates, Megan , Elamari, Hichem , Girard, Christian , Griveau, Sophie , Nyokong, Tebello , Bedioui, Fethi
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244404 , vital:51254 , xlink:href="https://doi.org/10.1016/j.jelechem.2012.01.001"
- Description: We propose in this work to compare three approaches using 4-azidoaniline combined with “click” chemistry and electrochemistry to anchor ferrocene moieties at glassy carbon surfaces. The immobilisation of a newly synthesised molecule, 4-(4-ferrocenyl-1H-1,2,3-triazol-1-yl)aniline, through direct electropolymerisation or via in situ diazotization followed by electrografting is studied by analysing the samples by XPS and electrochemistry.
- Full Text:
- Date Issued: 2012
4-Azidoaniline-based electropolymer as a building block for functionalisation of conductive surfaces
- Authors: Coates, Megan , Elamari, Hichem , Girard, Christian , Griveau, Sophie , Nyokong, Tebello , Bedioui, Fethi
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244404 , vital:51254 , xlink:href="https://doi.org/10.1016/j.jelechem.2012.01.001"
- Description: We propose in this work to compare three approaches using 4-azidoaniline combined with “click” chemistry and electrochemistry to anchor ferrocene moieties at glassy carbon surfaces. The immobilisation of a newly synthesised molecule, 4-(4-ferrocenyl-1H-1,2,3-triazol-1-yl)aniline, through direct electropolymerisation or via in situ diazotization followed by electrografting is studied by analysing the samples by XPS and electrochemistry.
- Full Text:
- Date Issued: 2012
A comparative study on the sensitive detection of hydroxyl radical using thiol-capped CdTe and CdTe/ZnS quantum dots
- Adegoke, Oluwasesan, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242778 , vital:51077 , xlink:href="https://doi.org/10.1007/s10895-012-1089-2"
- Description: Four types of water-soluble luminescent quantum dots (QDs) whose surface was functionlaized with thioglycolic acid (TGA), 3-mercaptopropionic acid (MPA), or glutathione (GSH), were investigated for the sensitive and selective detection of hydroxyl radical (●OH) in aqueous media. It was found that the type of capping agent and QD influenced the sensitivity of the probe. The order of sensitivity of the probe was: GSH-CdTe@ZnS > MPA-CdTe@ZnS > TGA-CdTe > MPA-CdTe QDs. Under the optimum conditions, a limit of detection as low as 8.5 × 10-8 M was obtained using GSH-CdTe@ZnS. The effects of foreign reactive oxygen species and the Fenton reactants and products as possible interferences on the proposed probe were negligible for CdTe@ZnS QDs. Besides, experimental results indicated that CdTe@ZnS QDs were more attractive for the selective recognition of ●OH than CdTe QDs. The mechanistic reaction pathway between the QDs and ●OH is proposed.
- Full Text:
- Date Issued: 2012
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242778 , vital:51077 , xlink:href="https://doi.org/10.1007/s10895-012-1089-2"
- Description: Four types of water-soluble luminescent quantum dots (QDs) whose surface was functionlaized with thioglycolic acid (TGA), 3-mercaptopropionic acid (MPA), or glutathione (GSH), were investigated for the sensitive and selective detection of hydroxyl radical (●OH) in aqueous media. It was found that the type of capping agent and QD influenced the sensitivity of the probe. The order of sensitivity of the probe was: GSH-CdTe@ZnS > MPA-CdTe@ZnS > TGA-CdTe > MPA-CdTe QDs. Under the optimum conditions, a limit of detection as low as 8.5 × 10-8 M was obtained using GSH-CdTe@ZnS. The effects of foreign reactive oxygen species and the Fenton reactants and products as possible interferences on the proposed probe were negligible for CdTe@ZnS QDs. Besides, experimental results indicated that CdTe@ZnS QDs were more attractive for the selective recognition of ●OH than CdTe QDs. The mechanistic reaction pathway between the QDs and ●OH is proposed.
- Full Text:
- Date Issued: 2012
A highly selective and sensitive pyridylazo-2-naphthol-poly (acrylic acid) functionalized electrospun nanofiber fluorescence “turn-off” chemosensory system for Ni 2+
- Adewuyi, Sheriff, Ondigo, Dezzline A, Zugle, Ruphino, Tshentu, Zenixole R, Nyokong, Tebello, Torto, Nelson
- Authors: Adewuyi, Sheriff , Ondigo, Dezzline A , Zugle, Ruphino , Tshentu, Zenixole R , Nyokong, Tebello , Torto, Nelson
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246012 , vital:51428 , xlink:href="https://doi.org/10.1039/C2AY25182E"
- Description: A fluorescent nanofiber probe for the determination of Ni2+ was developed via the electrospinning of a covalently functionalized pyridylazo-2-naphthol-poly(acrylic acid) polymer. Fluorescent nanofibers with diameters in the range 230–800 nm were produced with uniformly dispersed fluorophores. The excitation and emission fluorescence were at wavelengths 479 and 557 nm respectively, thereby exhibiting a good Stokes' shift. This Ni2+ probe that employs fluorescence quenching in a solid receptor–fluorophore system exhibited a good correlation between the fluorescence intensity and nickel concentration up to 1.0 μg mL−1 based on the Stern–Volmer mechanism. The probe achieved a detection limit (3δ/S) of 0.07 ng mL−1 and a precision, calculated as a relative standard deviation (RSD) of more than 4% (n = 8). The concentration of Ni2+ in a certified reference material (SEP-3) was found to be 0.8986 μg mL−1, which is significantly comparable with the certified value of 0.8980 μg mL−1. The accuracy of the determinations, expressed as a relative error between the certified and the observed values of certified reference groundwater was ≤0.1%. The versatility of the nanofiber probe was demonstrated by affording simple, rapid and selective detection of Ni2+ in the presence of other competing metal ions by direct analysis, without employing any further sample handling steps.
- Full Text:
- Date Issued: 2012
- Authors: Adewuyi, Sheriff , Ondigo, Dezzline A , Zugle, Ruphino , Tshentu, Zenixole R , Nyokong, Tebello , Torto, Nelson
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246012 , vital:51428 , xlink:href="https://doi.org/10.1039/C2AY25182E"
- Description: A fluorescent nanofiber probe for the determination of Ni2+ was developed via the electrospinning of a covalently functionalized pyridylazo-2-naphthol-poly(acrylic acid) polymer. Fluorescent nanofibers with diameters in the range 230–800 nm were produced with uniformly dispersed fluorophores. The excitation and emission fluorescence were at wavelengths 479 and 557 nm respectively, thereby exhibiting a good Stokes' shift. This Ni2+ probe that employs fluorescence quenching in a solid receptor–fluorophore system exhibited a good correlation between the fluorescence intensity and nickel concentration up to 1.0 μg mL−1 based on the Stern–Volmer mechanism. The probe achieved a detection limit (3δ/S) of 0.07 ng mL−1 and a precision, calculated as a relative standard deviation (RSD) of more than 4% (n = 8). The concentration of Ni2+ in a certified reference material (SEP-3) was found to be 0.8986 μg mL−1, which is significantly comparable with the certified value of 0.8980 μg mL−1. The accuracy of the determinations, expressed as a relative error between the certified and the observed values of certified reference groundwater was ≤0.1%. The versatility of the nanofiber probe was demonstrated by affording simple, rapid and selective detection of Ni2+ in the presence of other competing metal ions by direct analysis, without employing any further sample handling steps.
- Full Text:
- Date Issued: 2012
A study on the morphology of thin copper films on para-aramid yarns and their influence on the yarn’s electro-conductive and mechanical properties
- Schwarz, Anne, Hakuzimana, Jean, Westbroek, Philippe, Mey, Gilbert De, Priniotakis, Georgios, Nyokong, Tebello, Langenhove, Lieva Van
- Authors: Schwarz, Anne , Hakuzimana, Jean , Westbroek, Philippe , Mey, Gilbert De , Priniotakis, Georgios , Nyokong, Tebello , Langenhove, Lieva Van
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/243487 , vital:51157 , xlink:href="https://doi.org/10.1177/0040517511431291"
- Description: The latest technological advances in new materials and devices enabled wearable systems to be created by utilizing textile solutions. These solutions require electro-conductive yarns as a basic component. Although the production of electroconductive yarn is widely reported, research is still necessary to characterize them to advance their electro-conductive and mechanical properties. Hence, we served this need and characterized copper-coated para-aramid yarns produced by an in-house developed electroless deposition method. In this paper we present our investigation on the yarn’s copper layer characteristics after deposition. Furthermore, we looked, in depth, at the yarn’s electro-conductive properties before and after washing as well as their mechanical properties before and after copper deposition. We found a dependency of the copper layer morphology on its deposition time. This is directly correlated to the resulting layer thickness and hence to the yarn’s electro-conductive properties, demonstrating the autocatalytic nature of the coating process. Above that, the electro-conductive properties of the coated yarn linearly decrease with washing cycles. Furthermore, the copper coating impairs the yarn’s mechanical properties decreasing its specific stress at break by 30%.
- Full Text:
- Date Issued: 2012
- Authors: Schwarz, Anne , Hakuzimana, Jean , Westbroek, Philippe , Mey, Gilbert De , Priniotakis, Georgios , Nyokong, Tebello , Langenhove, Lieva Van
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/243487 , vital:51157 , xlink:href="https://doi.org/10.1177/0040517511431291"
- Description: The latest technological advances in new materials and devices enabled wearable systems to be created by utilizing textile solutions. These solutions require electro-conductive yarns as a basic component. Although the production of electroconductive yarn is widely reported, research is still necessary to characterize them to advance their electro-conductive and mechanical properties. Hence, we served this need and characterized copper-coated para-aramid yarns produced by an in-house developed electroless deposition method. In this paper we present our investigation on the yarn’s copper layer characteristics after deposition. Furthermore, we looked, in depth, at the yarn’s electro-conductive properties before and after washing as well as their mechanical properties before and after copper deposition. We found a dependency of the copper layer morphology on its deposition time. This is directly correlated to the resulting layer thickness and hence to the yarn’s electro-conductive properties, demonstrating the autocatalytic nature of the coating process. Above that, the electro-conductive properties of the coated yarn linearly decrease with washing cycles. Furthermore, the copper coating impairs the yarn’s mechanical properties decreasing its specific stress at break by 30%.
- Full Text:
- Date Issued: 2012
CdTe quantum dots functionalized with 4-amino-2, 2, 6, 6-tetramethylpiperidine-N-oxide as luminescent nanoprobe for the sensitive recognition of bromide ion
- Adegoke, Oluwasesan, Hosten, Eric C, McCleland, Cedric, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Hosten, Eric C , McCleland, Cedric , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244393 , vital:51253 , xlink:href="https://doi.org/10.1016/j.aca.2012.01.040"
- Description: A novel bromide ion-selective modified nanoprobe sensor based on 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4AT)-functionalized CdTe quantum dots (QDs-4AT) has been developed. Fluorescence quenching of the QDs by 4AT was observed. The functionalized QDs-4AT nanoprobe allowed a highly sensitive determination of bromide ion via analyte-induced change in the photoluminescence (fluorescence recovery) of the modified QDs. A detection limit of 0.6 nM of bromide ion was obtained, while the interfering effect of other inorganic cations and anions was investigated to examine the selectivity of the nanoprobe. The linear range was between 0.01 and 0.13 μM. Combined fluorescence lifetime and electron paramagnetic resonance measurements confirmed electron transfer processes between bromide ion and QDs-4AT.
- Full Text:
- Date Issued: 2012
- Authors: Adegoke, Oluwasesan , Hosten, Eric C , McCleland, Cedric , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244393 , vital:51253 , xlink:href="https://doi.org/10.1016/j.aca.2012.01.040"
- Description: A novel bromide ion-selective modified nanoprobe sensor based on 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4AT)-functionalized CdTe quantum dots (QDs-4AT) has been developed. Fluorescence quenching of the QDs by 4AT was observed. The functionalized QDs-4AT nanoprobe allowed a highly sensitive determination of bromide ion via analyte-induced change in the photoluminescence (fluorescence recovery) of the modified QDs. A detection limit of 0.6 nM of bromide ion was obtained, while the interfering effect of other inorganic cations and anions was investigated to examine the selectivity of the nanoprobe. The linear range was between 0.01 and 0.13 μM. Combined fluorescence lifetime and electron paramagnetic resonance measurements confirmed electron transfer processes between bromide ion and QDs-4AT.
- Full Text:
- Date Issued: 2012
Characterization of 2,(3)-tetra-(4-oxo-benzamide) phthalocyaninato cobalt (II)—single walled carbon nanotube conjugate platforms and their use in electrocatalysis of amitrole
- Mugadza, Tawanda, Arslanoğlu, Yasin, Nyokong, Tebello
- Authors: Mugadza, Tawanda , Arslanoğlu, Yasin , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244382 , vital:51252 , xlink:href="https://doi.org/10.1016/j.electacta.2012.02.041"
- Description: In this paper we report on the use of carboxylic acid functionalized single walled carbon nanotubes (SWCNT) in the synthesis of 2,(3)-tetra-(4-oxo-benzamide)phthalocyaninato cobalt (II)–single walled carbon nanotube conjugates (CoTOBPc–SWCNT), their characterization and application in the electrocatalytic oxidation of amitrole. Cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy were used for the detection of amitrole on the modified glassy carbon electrode. The catalytic rate constant was 1.6 × 103 M−1 s−1 and the apparent electron rate transfer constant was 1.5 × 10−5 cm s−1. The linear dynamic range was 1.0 × 10−6–3.0 × 10−5 M, with a sensitivity of ∼1.13 A mol−1 L cm−2.
- Full Text:
- Date Issued: 2012
- Authors: Mugadza, Tawanda , Arslanoğlu, Yasin , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244382 , vital:51252 , xlink:href="https://doi.org/10.1016/j.electacta.2012.02.041"
- Description: In this paper we report on the use of carboxylic acid functionalized single walled carbon nanotubes (SWCNT) in the synthesis of 2,(3)-tetra-(4-oxo-benzamide)phthalocyaninato cobalt (II)–single walled carbon nanotube conjugates (CoTOBPc–SWCNT), their characterization and application in the electrocatalytic oxidation of amitrole. Cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy were used for the detection of amitrole on the modified glassy carbon electrode. The catalytic rate constant was 1.6 × 103 M−1 s−1 and the apparent electron rate transfer constant was 1.5 × 10−5 cm s−1. The linear dynamic range was 1.0 × 10−6–3.0 × 10−5 M, with a sensitivity of ∼1.13 A mol−1 L cm−2.
- Full Text:
- Date Issued: 2012
Comparison of carbon screen-printed and disk electrodes in the detection of antioxidants using CoPc derivatives
- Matemadombo, Fungisai, Apetrei, Constantin, Nyokong, Tebello, Rodríguez-Méndez, María Luz, de Saja, José Antonio
- Authors: Matemadombo, Fungisai , Apetrei, Constantin , Nyokong, Tebello , Rodríguez-Méndez, María Luz , de Saja, José Antonio
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244371 , vital:51251 , xlink:href="https://doi.org/10.1016/j.snb.2012.02.088"
- Description: Cobalt phthalocyanine (CoPc) and cobalt phthalocyanine carboxylic derivatives (CoTCPc and CoOCPc) have been used as electrocatalysts for the detection of the antioxidants vanillic acid, caffeic acid, pyrogallol, and ascorbic acid on screen-printed carbon and disk electrode surfaces. The cobalt phthalocyanines were used to detect vanillic acid (with limit of detection ranging from 1.15 μM to 2.42 μM at potentials of 0.55–0.88 V vs. Ag|AgCl), caffeic acid (with limit of detection ranging from 1.17 μM to 2.20 μM at potentials of 0.30–0.81 V vs. Ag|AgCl), pyrogallol (with limit of detection ranging from 1.16 μM to 3.63 μM at potentials of 0.52–0.63 V vs. Ag|AgCl), and ascorbic acid (with limit of detection ranging from 1.16 μM to 1.58 μM at potentials of 0.34–0.46 V vs. Ag|AgCl). The kinetic studies also demonstrate diffusion-controlled processes at the electrode surface. The SPCE electrodes have better detection properties towards vanillic acid, caffeic acid, pyrogallol while the disk electrodes had better ascorbic acid detection properties as proven by kinetic studies. Both types CoPc-influenced electrodes show 100% discrimination of the antioxidants.
- Full Text:
- Date Issued: 2012
- Authors: Matemadombo, Fungisai , Apetrei, Constantin , Nyokong, Tebello , Rodríguez-Méndez, María Luz , de Saja, José Antonio
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244371 , vital:51251 , xlink:href="https://doi.org/10.1016/j.snb.2012.02.088"
- Description: Cobalt phthalocyanine (CoPc) and cobalt phthalocyanine carboxylic derivatives (CoTCPc and CoOCPc) have been used as electrocatalysts for the detection of the antioxidants vanillic acid, caffeic acid, pyrogallol, and ascorbic acid on screen-printed carbon and disk electrode surfaces. The cobalt phthalocyanines were used to detect vanillic acid (with limit of detection ranging from 1.15 μM to 2.42 μM at potentials of 0.55–0.88 V vs. Ag|AgCl), caffeic acid (with limit of detection ranging from 1.17 μM to 2.20 μM at potentials of 0.30–0.81 V vs. Ag|AgCl), pyrogallol (with limit of detection ranging from 1.16 μM to 3.63 μM at potentials of 0.52–0.63 V vs. Ag|AgCl), and ascorbic acid (with limit of detection ranging from 1.16 μM to 1.58 μM at potentials of 0.34–0.46 V vs. Ag|AgCl). The kinetic studies also demonstrate diffusion-controlled processes at the electrode surface. The SPCE electrodes have better detection properties towards vanillic acid, caffeic acid, pyrogallol while the disk electrodes had better ascorbic acid detection properties as proven by kinetic studies. Both types CoPc-influenced electrodes show 100% discrimination of the antioxidants.
- Full Text:
- Date Issued: 2012