Photodegradation of ibuprofen using 5-10-15-20-tetrakis (4-bromophenyl) porphyrin conjugated to graphene quantum dots
- Authors: Magaela, N Bridged , Ndlovu, Knowledge S , Tshangana, Charmaine S , Muleia, Adoph A , Mamba, Bhekie B , Nyokong, Tebello , Managa, Muthumuni
- Date: 2022
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/304819 , vital:58493 , xlink:href="https://doi.org/10.1016/j.optmat.2022.113147"
- Description: Ibuprofen (IBU) is a common anti-inflammatory drug that is consumed by many individuals in the world. As such, analytical studies have detected high concentrations of the drug in many waterbodies, which poses a risk of harmful effects on the environment and public health. The hydroxyl radical technologies, a collective of techniques also known as advanced oxidation processes (AOPs), can be utilized to degrade this emerging pollutant. In this study, the photodegradation of ibuprofen using 5,10,15,20-tetrakis(4-bromophenyl) porphyrin conjugated to graphene quantum dots was investigated using a custom-built photoreactor. Three different concentrations of IBU (200, 300 and 500 μM) were utilized as initial concentrations. The pH of the IBU was varied between acidic (pH 3.0), natural (pH 5.0) and alkaline (pH 9.0) to note the effect on IBU degradation as a function of time. The Highest ФΔ was obtained for InTBrP- GDQs (ФΔ = 0.80), followed by InTBrP (ФΔ = 0.74). The photodegradation efficiency of the TBrP-GQDs and InTBrP-GQDs were determined to be 43.2 and 76.1% respectively.
- Full Text:
- Date Issued: 2022
Polyurethane composite adsorbent using solid phase extraction method for preconcentration of metal ion from aqueous solution
- Authors: Olorundare, O F , Msagati, T A M , Okonkwo, J O , Krause, Rui W M , Mamba, Bhekie B
- Date: 2015
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125386 , vital:35778 , https://doi.org/10.1007/s13762-014-0645-5
- Description: Polyurethane composite adsorbent polymeric material was prepared and investigated for selected solid-phase extraction for metal ions, prior to its determination by inductively coupled plasma optical emission spectrometry. The surface characterisation was done using Fourier transform infrared spectroscopy. The separation and preconcentration conditions of the analytes investigated includes influence of pH, sample loading flow rate, elution flow rate, type and concentration of eluents. The optimum pH for the highest efficient recoveries for all metal ions, which ranged from 70 to 85 %, is pH 7. The metal ions were quantitatively eluted with 5 mL of 2 mol/L HNO3. Common coexisting ions did not interfere with the separation. The percentage recovery of the metal ions ranged between 70 and 89 %, while the results for the limit of detection and limit of quantification ranged from 0.249 to 0.256 and 0.831 to 0.855, respectively. The experimental tests showed good preconcentration results of trace levels of metal ions using synthesised polyurethane polymer adsorbent composite.
- Full Text:
- Date Issued: 2015
Preparation and use of maize tassels’ activated carbon for the adsorption of phenolic compounds in environmental waste water samples
- Authors: Olorundare, O F , Msagati, T A M , Okonkwo, J O , Krause, Rui W M , Mamba, Bhekie B
- Date: 2015
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125331 , vital:35773 , https://doi.org/10.1007/s11356-014-3742-6
- Description: The determination and remediation of three phenolic compounds bisphenol A (BPA), ortho-nitrophenol (o-NTP), parachlorophenol (PCP) in wastewater is reported. The analysis of these molecules in wastewater was done using gas chromatography (GC) × GC time-of-flight mass spectrometry while activated carbon derived from maize tassel was used as an adsorbent. During the experimental procedures, the effect of various parameters such as initial concentration, pH of sample solution, eluent volume, and sample volume on the removal efficiency with respect to the three phenolic compounds was studied. The results showed that maize tassel produced activated carbon (MTAC) cartridge packed solid-phase extraction (SPE) system was able to remove the phenolic compounds effectively (90.84–98.49 %, 80.75–97.11 %, and 78.27–97.08 % for BPA, o-NTP, and PCP, respectively) . The MTAC cartridge packed SPE sorbent performance was compared to commercially produced C18 SPE cartridges and found to be comparable. All the parameters investigated were found to have a notable influence on the adsorption efficiency of the phenolic compounds from wastewaters at different magnitudes.
- Full Text:
- Date Issued: 2015
Activated carbon from lignocellulosic waste residues: effect of activating agent on porosity characteristics and use as adsorbents for organic species
- Authors: Olorundare, O F , Okonkwo, J O , Msagati, T A M , Mamba, Bhekie B , Krause, Rui W M
- Date: 2014
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125233 , vital:35748 , https://doi.org/10.1007/s11270-014-1876-2
- Description: This paper reports on the effect of activating agents such as the impregnation ratio of phosphoric acid (1:1–1:5) at constant activation temperature on the performance of porous activated carbon from waste residues (maize tassel). The variation in the impregnation ratio of the produced activated carbon (AC) from 1:1 to 1:5 enabled the preparation of a high surface area (1,263 m2/g) and a large pore volume (1.592 cm3/g) of AC produced from maize tassel (MT) using a convectional chemical activating agent (phosphoric acid). Impregnation ratios (IR) of the precursors were varied between 1:1 and 1:5 in which it was found that the ratio of 1:4 was optimal based on the high surface area, while 1:5 has the optimal pore volume value for the produced activated carbon.
- Full Text:
- Date Issued: 2014
Comparison between base metals and platinum group metals in nitrogen, M codoped TiO 2 (M= Fe, Cu, Pd, Os) for photocatalytic removal of an organic dye in water
- Authors: Kuvarega, Alex T , Mamba, Bhekie B , Krause, Rui W M
- Date: 2014
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125129 , vital:35734 , https://doi.org/10.1155/2014/962102
- Description: The photocatalytic performance of a number of nonmetal and metal codoped TiO2 for the degradation of eosin yellow under simulated solar radiation was investigated. The synthesised materials were characterised by FTIR, Raman spectroscopy, XRD, DRUV-Vis, SEM, and TEM.The N, metal codoped TiO2 containing 0.5 wt.% of the metal consisted mainly of the anatase phase, with a particle size range of 15–28 nm. The particles were largely spherical and shifted the absorption edge well into the visible region. Band gap reduction was more pronounced for the N, PGM codoped TiO2 compared to N, base metal codoped samples. Codoping led to an enhancement in the photocatalytic activity of the materials for the degradation of eosin yellow. N, Pd codoped TiO2 was the most effective photocatalyst (99.9% dye removal) while N, Cu codoped TiO2 showed the least activity (25.5% removal). The mechanism for the photocatalytic enhancement was proposed on the basis of formation of an electron deficient Schottky barrier at the semiconductor-metal interface, which acts as an electron sink and thus retards electron-hole recombination. It was shown that the ability of the photocatalyst to degrade the dye depends on the nature and type of the metal dopant in the codoped TiO2 system.
- Full Text:
- Date Issued: 2014
Steam activation, characterisation and adsorption studies of activated carbon from maize tassels.
- Authors: Olorundare, O F , Msagati, Titus A , Krause, Rui W M , Okonkwo, J O , Mamba, Bhekie B
- Date: 2014
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/123847 , vital:35507 , https://doi.org/10.1080/02757540.2013.877001
- Description: In this paper, steam-produced activated carbon (STAC) from maize tassel (MT) was evaluated for its ability to remove basic dye (methylene blue MB) from aqueous solution in a batch adsorption process. The equilibrium experiments were conducted in the range of 50–300 mg/L initial MB concentrations at 30°C, for effect of pH, adsorbent dosage and contact time. The experimental data were analysed by Langmuir, Freundlich and Temkin isotherm models of adsorption. Freundlich adsorption isotherm was found to have highest value of R2(R2=0.97) compared to other models of Langmuir and Temkin having (0.96 and 0.95 respectively). STAC has a high adsorptive capacity for MB dye (200 mg/g) and also showed favourable adsorption for the dye with the separation factor for the dye-activated carbon system. The kinetic data obtained were analysed using pseudo first-order kinetic equation and pseudo second-order kinetic equation. The experimental data fitted well into pseudo second-order kinetic equation, as demonstrated by the high value of R2.
- Full Text:
- Date Issued: 2014
Composite polyester membranes with embedded dendrimer hosts and bimetallic Fe/Ni nanoparticles: synthesis, characterisation and application to water treatment
- Authors: Malinga, S P , Arotiba, O A , Mapolie, S F , Krause, Rui W M , Mamba, Bhekie B , Diallo, M S
- Date: 2013
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125086 , vital:35727 , https://doi.org/10.1007/s11051-013-1698-y
- Description: This study describes the preparation, characterization and evaluation of new composite membranes with embedded dendrimer hosts and Fe/Ni nanoparticles. These new reactive membranes consist of films of cyclodextrin–poly(propyleneimine) dendrimers (β-CD–PPI) that are deposited onto commercial polysulfone microporous supports and crosslinked with trimesoyl chloride (TMC). The membranes were subsequently loaded with Fe/Ni nanoparticles and evaluated as separation/reactive media in aqueous solutions using 2,4,6-trichlorophenol as model pollutant. The morphology and physicochemical properties of the composite membranes were characterised using high-resolution transmission electron microscopy (HR-TEM), atomic force microscopy and measurements of contact angle, water intake, porosity and water permeability. The sorption capacity and catalytic activity of the membranes were evaluated using ion chromatography, atmospheric pressure chemical ionisation-mass spectrometry and UV–Vis spectroscopy (UV–Vis). The sizes of the embedded Fe/Ni nanoparticles in the membranes ranged from 40 to 66 nm as confirmed by HR-TEM. The reaction rates for the dechlorination of 2,4,6-trichlorophenol ranged from 0.00148 to 0.00250 min−1. In all cases, we found that the reaction by-products consisted of chloride ions and mixtures of compounds including phenol (m/z = 93), 2,4-dichlorophenol (m/z = 163) and 4-chlorophenol (m/z = 128). The overall results of this study suggest that β-CD–PPI dendrimers are promising building blocks for the synthesis of composite and reactive membranes for the efficient removal of chlorinated organic pollutants from water.
- Full Text:
- Date Issued: 2013
Nanostructured β-cyclodextrin-hyperbranched polyethyleneimine (β-CD-HPEI) embedded in polysulfone membrane for the removal of humic acid from water
- Authors: Malinga, S P , Arotiba, O A , Mapolie, S F , Diallo, M S , Mamba, Bhekie B , Krause, Rui W M
- Date: 2013
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125119 , vital:35732 , https://doi.org/10.1080/01496395.2013.809108
- Description: The synthesis of a new β-cyclodextrin-hyperbranched polyethyleneimine (β-CD-HPEI)/polysulfone (PSf) membranes via interfacial polymerization of trimesoyl chloride and β-CD-HPEI is described in this paper. The membranes were characterized by atomic force microscopy (AFM), high resolution scanning electron microscopy (HR-SEM) and contact-angle measurements. Water permeability and rejection data were obtained using a cross-flow filtration system at 0.69 MPa. The membranes were hydrophilic (25° to 63°), showed high humic acid rejection (>amp;80%), and maintained a constant flux throughout the filtration. The modified membranes were rougher than the pristine PSf membranes but they exhibited better antifouling properties due to the hydrophilic surface which acted as a barrier against humic acid deposition. The modification of PSf with β-CD-HPEI resulted in enhanced hydrophilicity and water permeability while still maintaining high humic acid rejection. Supplemental materials are available for this article. Go to the publisher's online edition of Separation Science & Technology to view the supplemental file.
- Full Text:
- Date Issued: 2013
Composite polyester membranes with embedded dendrimer hosts and bimetallic Fe/Ni nanoparticles: synthesis, characterisation and application to water treatment
- Authors: Malinga, S P , Arotiba, O A , Mapolie, S F , Krause, Rui W M , Diallo, M S , Mamba, Bhekie B
- Date: 1968
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/123619 , vital:35465 , https://doi.org/10.1007/s11051-013-1698-y
- Description: This study describes the preparation, characterization and evaluation of new composite membranes with embedded dendrimer hosts and Fe/Ni nanoparticles. These new reactive membranes consist of films of cyclodextrin–poly(propyleneimine) dendrimers (β-CD–PPI) that are deposited onto commercial polysulfone microporous supports and crosslinked with trimesoyl chloride (TMC). The membranes were subsequently loaded with Fe/Ni nanoparticles and evaluated as separation/reactive media in aqueous solutions using 2,4,6-trichlorophenol as model pollutant. The morphology and physicochemical properties of the composite membranes were characterised using high-resolution transmission electron microscopy (HR-TEM), atomic force microscopy and measurements of contact angle, water intake, porosity and water permeability. The sorption capacity and catalytic activity of the membranes were evaluated using ion chromatography, atmospheric pressure chemical ionisation-mass spectrometry and UV–Vis spectroscopy (UV–Vis). The sizes of the embedded Fe/Ni nanoparticles in the membranes ranged from 40 to 66 nm as confirmed by HR-TEM. The reaction rates for the dechlorination of 2,4,6-trichlorophenol ranged from 0.00148 to 0.00250 min−1. In all cases, we found that the reaction by-products consisted of chloride ions and mixtures of compounds including phenol (m/z = 93), 2,4-dichlorophenol (m/z = 163) and 4-chlorophenol (m/z = 128). The overall results of this study suggest that β-CD–PPI dendrimers are promising building blocks for the synthesis of composite and reactive membranes for the efficient removal of chlorinated organic pollutants from water.
- Full Text:
- Date Issued: 1968